EasyManuals Logo

OneTouch Select PLUS User Manual

OneTouch Select PLUS
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
3
Take a test
69
Out-of-range results may be due to:
• Not following the instructions beginning on page
page62.
• Control solution is contaminated, expired, or past its
discard date.
• Test strip or test strip vial is damaged or expired.
• Meter, test strips and/or control solution were not all
at the same temperature when the control solution
test was performed.
• Control solution was not at room temperature
(20-25°C).
• A problem with the meter.
• Dirt or contamination in the small well on the top of
the control solution cap (see Step 5).
Control solution results can be seen when reviewing past
results, but are not included in result averages.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the OneTouch Select PLUS and is the answer not in the manual?

OneTouch Select PLUS Specifications

General IconGeneral
Measurement Range20-600 mg/dL
Test Time5 seconds
CodingNo coding required
Battery LifeApproximately 1000 tests
Memory500 test results
Automatic Shutoff2 minutes after last action
Battery1 CR2032 lithium battery
Operating Conditions10%-90% RH
Storage Conditions10-90% relative humidity
WeightApprox. 52.5 g (with battery)

Related product manuals