onga ECO800 - Technical Information; Model Data

Technical Information
e
c
o
8 0 0
Model:
ECO800
RPM:
Low 1450RPM (default factory setting)
Med 2400RPM (default factory setting)
High 2800RPM (default factory setting)
Adjustable Range: 1000-2850RPM
Electrical Rating:
230-240V 50Hz single phase
Rated Current:
Low: 1.3A (max)
Med:
4.4A (max)
High:
6.5A (max)
Input Power (P1):
Low: 160W (max)
Med:
595W (max)
High:
940W (max)
Pump Power (P2):
Low: 130W (max)
Med:
475W (max)
High:
750W (max)
Maximum Ratings: 2850RPM, P1 975W, P2 800W, 6.7A
IP Rating:
IP25
Inlet (Suction):
ABS Barrel Union to suit 50mm PVC pressure pipe
to AS/NZS 1477
Outlet (Discharge):
ABS Barrel Union to suit 50mm PVC pressure pipe
to AS/NZS 1477
Max Working Pressure:
260 kPa
Water Temperature Range:
5°C – 40°C
Maximum Ambient temperature:
5 5°C
Recommended pH Range:
7.2 - 7.8 (Guide Only)
Sound Power Level (Lwa):
Low: 57.5dB
Med: 65.2dB
High: 69.3dB
Motor:
Axial flux, permanent magnet, DC
Protection:
Mains over voltage, mains under voltage, over temperature,
under temperature, locked rotor, over current, phase disconnect.
Supply cord: 10A, H07RNF, 2m.
4
0
5
25
75
95
100
0
5
25
75
95
100
0
5
25
75
95
100
0
5
25
75
95
100
Eco800_OM_final
Monday, 12 November 2012 9:13:34 AM