Washing Procedure
Washing Procedure
Connect the inlet hose to
the tap. Plug in the power
cord. Lower the drain hose.
1
Put laundry in the tub.
3
Select the programme as you desired and
moment enjoy your time.
press the START/PAUSE button. From this
6
START/PAUSE
-10-
Press EJECT to release the
glass lid from the catch and
open it. Reverse the operation
to close the lid.
Note : If you pressed EJECT one time and
Lid is not lifted sufficiently from the catch
do not press it again instead lift it up.
2
Put proper amount of softener into the
Softener inlet if required. The Softener will be
automatically adds into the tub at the last rinsing cycle.
1. Do not add detergent or bleach into the softener inlet.
2. Using too much softener may lead unsatisfactory result.
Note :
4
Press the power switch.
5
To Next Page
Loading...
Need help?
General
