Familiarisation with Control Panel
MOVING DISPLAY
MOVING DISPLAY
Familiarisation with Control Panel
-5-
With this button water inlet selection can be
changed to Warm and Hot from the default
Cold. For only baby care program the
default water inlet selection is Hot.
TUB :
Tub display When the Power is ON
till the completion of programe.
will be ON
CHILD LOCK :
Child lock display will be on when Child lock is activated
ERROR SIGNALS:
Error signal s will be ON if any error occurs. (No Drain, No water,
Imbalance and Lid open)
FUNCTION:
Soak, Wash, Rinse and Spin display will be ON as per the
Programme selected to show the current process.
PAUSE:
Pause display will be blinking when you pressed the
pause button.
DELAY:
Delay display will be ON when you pressed the
delay button.
TIME BAR:
Display of 1 bar shows the start of Programe & display of all
bars shows the completion of Program.
PULSATOR :
Pulsator display will be ON and Moving forward and
reverse to show you the real motion of the Pulsator inside
the machine during Wash and Rinse.
CLOTH :
Cloth display will be ON during Wash , Rinse and Spin.
ARROWS and WATER DROPS :
Arrows and water Drops will be ON during Spin to show you
the real Spin happening inside the machine.
Temp
Temp
If you want to select individual wash, rinse and spin
operation or combination of these three you can press these
buttons. During this course Mode will be Changed to “Custom”
from the default “Fuzzy”.
1. Wash can be selected from 6 min to 30 min in steps.
2. Rinse can be selected 1 time rinse to 2 times over
flow rinse in steps.
3. Spin can be selected from 1 min to 11 min in steps.
Note:
Incase there is combination of functions in Custom mode by
memory and,
1. If you want to select only Wash course then press Rinse
and Spin button till their LED gets OFF.
2. If you want to select only Rinse course then press Wash
and Spin button till their LED gets OFF.
3. If you want to select only Spin course then press Wash
and Rinse button till their LED gets OFF.
Same way you can get the combination of any two functions by
pressing other functions OFF.
Function Selector
Function Selector
WATER LEVEL:
Water Level indicator will be ON as per the water level
selected.
WATER :
Water display will be Blinking during intake of water.
DRAIN :
Drain display will be ON during draining of water.
To Next Page
Loading...
Need help?
General
