Need help?Do you have a question about the Onkyo A-8037 and is the answer not in the manual?
General| Frequency response | 10Hz-100kHz (+1dB, -3dB) |
|---|---|
| Input sensitivity | 150mV (line) |
| Input Impedance | 47 kohms |
| Speaker Impedance | 4-16 ohms |
| Amplifier Type | Integrated Amplifier |
| Total harmonic distortion | 0.08% |
| Signal to noise ratio | 100dB (line) |
| Signal-to-Noise Ratio | 100dB (line) |
| Speaker load impedance | 4Ω to 16Ω |
| Dimensions | 435 x 120 x 308 mm |
| Weight | 6.8 kg |
Guidelines for replacing fuses to maintain protection against fire and electric shock.
Procedure for measuring insulation resistance for U.S.A. models to ensure safety.
Instructions for setting the voltage selector to match local power supplies for worldwide models.
Parts list for the Power Amplifier and Power Supply printed circuit boards.
Parts list for the NAEQ-2334 Equalizer Amplifier printed circuit board.
Parts list for the NAEQ-2334B Equalizer Amplifier printed circuit board.
Parts list for the NALED-2338 LED Display printed circuit board.
Parts list for the NALED-2339 LED Display printed circuit board.
Parts list for the NAVR-2335 Muting Switch printed circuit board.
Parts list for the NAVR-2335A Muting Switch printed circuit board.
Parts list for the NASW-2340 Speaker Switch printed circuit board.
Parts list for NASW-2341, NASW-2341A, NASW-2341B Power Switch boards.
Parts list for NASW-2336, NASW-2336A Input Selector boards.
Parts list for the NATC-2337 Tone Control printed circuit board.
Parts list for the NAHP-2342 Headphone Jack printed circuit board.
To Next Page
