Need help?Do you have a question about the Onkyo A-8067 and is the answer not in the manual?
80 watts per channel, min. RMS, at 8 ohms, both channels driven, from 20Hz to 20kHz with no more than 0.015% THD.
0.015% at rated power
2-50,000Hz ± 1dB
Phono (MM): 2.5mV/50 kohms, Phono (MC): 160μV/100/220 ohms, Tuner: 150mV/50 kohms
Phono (MM): 80dB (IHF A-202, 5mV input, 1 watt output), Phono (MC): 72dB (IHF A-202, 0.5mV input, 1 watt output)
AC 120V, 60Hz [D model], AC 220V, 50Hz [G model], AC 120V or 220V, 50/60Hz [W model]
435(W) x 144(H) x 391(D) mm
12kg. (26.5 lbs.)
For continued protection against risk fire, replace only with same type and same rating fuse.
Connect the insulating-resistance tester between the plug of power supply cable and the terminal GND on the back panel.
Be sure to set this switch to match the voltage of the power supply in your area before turning the power switch on.
Set the all control knobs to standard position
Connect the DC voltmeter between ID and VCT terminals.
Lists and describes all the controls and indicators on the front panel of the unit.
Illustrates how to connect various external audio components to the unit.
To Next Page
General
