26
En
In memory playback, you can create a playlist of up to 25
tracks. Memory playback can be set only when the
playback is stopped.
■ To Change the Display
While the memory setting operations, press DISPLAY
repeatedly to change the display information as follows:
Track number/Playlist number → Track number/Playing
time → Track number/Total playing time
■ To Select Other Tracks During Memory
Playback
Use 7/6 to select other tracks during memory
playback.
■ To Check the Playlist
While playback is stopped, use 5/4 to scroll
through the playlist. Track number and play time are
displayed.
■ To Remove Tracks from the Playlist
• While memory playback is stopped, press CLEAR.
Each press removes the last track from the playlist.
• The playlist is deleted on changing the playback mode
(press MEMORY after stopping the playback).
■ To Cancel Memory Playback
• Stop the playback, then press MEMORY to change the
playback mode. The MEMORY indicator goes off, and
memory playback is cancelled.
• Memory playback is also cancelled by pressing 0 to
open the disc tray, 8 or ON/STANDBY to turn off the
compact disc player.
Note
• If the total playing time is more than 99 minutes and 59 seconds,
“--:--” appears.
• You can add up to 25 tracks to the playlist. If you try to add more,
the message “MEM-FULL” appears.
Memory Playback (CD)
DISPLAY
7, 1, 6,
5, 4
0
MEMORY
ENTER
CLEAR
1
Press MEMORY.
The MEMORY indicator lights.
2
Use 7/6 to select the first track you want to
add to the playlist, and then press 1 or ENTER.
Repeat this step to add additional tracks to the playlist.
You can alternatively use the number buttons to select
tracks.
3
Press ENTER or 1.
The memory playback starts.
MEMORY indicator
Playlist numberTrack number
Track currently playing