En-24
iPod / iPhone Playback
Before using your iPod/iPhone with the CD player, be sure to update your iPod/iPhone with the latest software, available
from the Apple website.
If you leave your iPod/iPhone paused when using it on its own, eventually it will go into hibernation. If you connect it
to the USB port in this state, you’ll need to wait a few moments before your iPod/iPhone is ready for use.
Always remove your iPod/iPhone before moving the CD player.
Depending on your iPod/iPhone, or the type of content being played, some functions may not work as expected.
1
Connect your iPod/iPhone to the USB con-
nector on the front panel of the CD player
using the USB cable.
Note:
• Once you have connected the iPod /iPhone to the
CD player, no sound will be heard through head-
phones connected to the [PHONES] jack on the
CD player. Connect the headphones directly to
the iPod/iPhone.
2
Select “USB” using the [DISC/USB] button
on the CD player.
When no iPod/iPhone is connected, “No USB” will
be displayed.
3
To start playback, press the [] button.
Playback will start with the top file in the folder
structure.
To stop playback:
Press the [] button.
To pause playback:
Press the [] button. To resume playback, press the
[] button again.
Notes:
• Make sure that no video content is being played.
• It will take about 15 seconds for the connection to be
established.
• If the iPod/iPhone is connected while it is in the play
mode, the iPod/iPhone playback might stop.
• During playback on the iPod nano or iPod (5th gener-
ation), “ONKYO” is displayed on the iPod display and
the click wheel will be disabled.
When the playback stops, the “ONKYO” disappears
and the click wheel will be enabled.
• Adjusting the volume on your iPod/iPhone has no
effect.
• In case you inadvertently move your iPod/iPhone vol-
ume control, make sure the volume level is not set too
high before you reconnect your headphones.
• During playback, press the [DISPLAY] button repeat-
edly to display the following Track information.
DISPLAY button
Press to display more track information.
REPEAT button
Press to set the iPod/iPhone repeat
function.
Play [] button
RANDOM button
Press to set the iPod/iPhone shuffle
function.
[]/[] buttons
During playback, fast forwards or
fast reverses the track.
Press to select a function on the iPod/
iPhone.
[]/[] buttons
Selects the last or next track in the
iPod/iPhone.