Onkyo CR-545

Listening to the Radio—Continued
41
Erasing a Preset’s Name (FM / AM only)
With the following operation, all the preset’s names
are erased.
1
Select the preset name you want to
erase (see page 39).
2
Press the [MENU / CLEAR] button,
and then use the [ ] / [ ]
buttons to select “NameErase?”.
3
To erase the preset’s name, press the
[ENTER] button.
The preset’s name is erased and
“Complete” appears on the display.
Erasing Presets (FM / AM only)
1
Select the preset you want to erase
(see page 39).
2
Press the [MENU / CLEAR] button,
and then use the [ ] / [ ]
buttons to select “PresetErase?”.
3
Press [ENTER].
A message requesting confirmation appears.
To cancel the Preset Erase function at this
point, press the [MENU / CLEAR] button.
4
To erase the preset, press [ENTER].
The preset is erased and “Complete”
appears on the display.
Adjusting the Display's Brightness
1
Press the [MENU / CLEAR] button,
and then use the [ ] / [ ]
buttons to select “Dimmer?”.
2
Press [Enter].
3
Set the brightness with [ ] / [ ]
buttons.
Off: Normal
1: Dim
2: Dimmer
4
Press [Enter].