Onkyo CR-725

59
Specifications
Specifications and features are subject to change without notice.
General
Power Supply: CR-725: AC 220-230 V, 50/60 Hz
CR-725DAB: AC 230 V, 50 Hz
Power Consumption: 42 W
Stand-by Power Consumption: 0.38 W
Dimensions (W × H × D): 205 × 116 × 338 mm (8-1/16" × 4-9/16" × 13-5/16")
Weight: CR-725: 5.1 kg (11.2 lbs.)
CR-725DAB: 5.2 kg (11.5 lbs.)
Audio Inputs
Digital Inputs: CR-725DAB: 1 (optical)
Analog Inputs: 4 (LINE1, LINE2, MD/TAPE, DOCK/CDR)
Audio Outputs
Analog Outputs: 2 (MD/TAPE, DOCK/CDR)
Subwoofer Pre Outputs: 1
Speaker Outputs: 2
Phones: 1
Amplifier Section
Power Output:
50 W + 50 W (4 Ω, 1 kHz, 1% THD)
THD (Total Harmonic Distortion): 0.5% (Power Rated) 0.08% (1 kHz, 1 W)
Damping Factor:
50 (Front, 1 kHz, 8 Ω)
Input Sensitivity and Impedance:
150 mV/50 kΩ (LINE)
Output Level and Impedance:
150 mV/2.2 kΩ (REC OUT)
Frequency Response: 10 Hz–60 kHz/+1/–3dB (LINE1)
Tone Control: ±6 dB, 80 Hz (BASS)
±8 dB, 10 kHz (TREBLE)
+8 dB, 80 Hz (S.BASS)
Signal to Noise Ratio: 100 dB (LINE1, IHF-A)
Speaker Impedance:
4 Ω–16 Ω
Tuner Section
FM
Tuning Frequency Range: 87.50 MHz–108.00 MHz
Usable Sensitivity: Stereo: 22.2 dBf (IHF) Mono: 15.2 dBf (IHF)
Signal to Noise Ratio: Stereo: 67 dB (IHF-A) Mono: 73 dB (IHF-A)
THD (Total Harmonic Distortion): Stereo: 0.5% (1 kHz) Mono: 0.3% (1 kHz)
Stereo Separation: 40 dB (1 kHz)
DAB (CR-725DAB only)
Tuning Frequency Range: 174.928–239.200 MHz
Frequency Response: 20 Hz–20 kHz
Signal to Noise Ratio: 94 dB
THD (Total Harmonic Distortion): 0.09%
CD
Frequency Response: 4 Hz–20 kHz
Audio Dynamic Range: 96 dB
THD (Total Harmonic Distortion): 0.005%
Wow and Flutter: Below threshold of measurability
Audio Output/Impedance (Analog):
1.3 V (rms)/1 kΩ