Onkyo DP-S1 User Manual

18
Advanced Setup
Various settings
Tap to make settings for Wi-Fi and BLUETOOTH, settings for audio output, pass code
settings, software updates, and a variety of other settings.
1. Tap " " in the home screen.
2. Tap the item you want to set.
∫ Wi-Fi
"On": Connection to a network via Wi-Fi is enabled. This also enables you to make various
settings related to Wi-Fi, such as selecting the SSID of the access point to be connected.
"Off (default value)": Connection by Wi-Fi is not enabled
∫ Bluetooth
"On": Enables connection with a BLUETOOTH wireless technology enabled device. This
also enables you to make various settings related to BLUETOOTH, such as pairing.
"Off (default value)": When BLUETOOTH is not to be used
∫ Brightness
You can adjust the brightness of the screen. The brightness can be set with the slide bar in
10 steps between " (1)" and " (10)". The screen becomes brighter when you slide it to
the right (default value is "9").
∫ Balanced Output Select
Use when balanced headphones are to be connected.
"Balanced (default value)": Compared to the normal single-ended operation, you can get a
larger output and the high voltage is not grounded together with the small signal, so you can
anticipate a superior effect in the quality of the music. Because you get a larger output, you
can drive headphones with a higher impedance.
"ACG": The basic operating method is the same as Balanced (mode), but uses technology
to even more forcefully fix grounding standards, so you can enjoy a sound quality with
improved clarity and stability than Balanced (mode). Output volume is the same as the
regular single-ended operation, however.
0 This unit does not support simultaneous use of the balanced headphone jack and the
headphone jack. Using both jacks at the same time may result in damage.
∫ Line Out Mode
"On": Switch the headphone output to the line output mode to connect external equipment.
When "Line Out Mode" is on, output through the headphone jack is at maximum volume, so
do not use headphones. Adjust the volume on the connected device.
0 When turned on for European models, you can then select either "Fixed (default value)"
> Before Start > Part Names > Initial Setup > Playback
Advanced Setup | Supplementary Information | Others
Line
Library
Online
Balanced
Out
Wi-Fi
Bluetooth
Brightness
Balanced Output Select
Line Out Mode
Settings
1 2
SN29403051_DP-S1_En_1704XX.book 18 ページ ２０１７年４月１１日 火曜日 午後５時３７分

Onkyo DP-S1 Specifications

General

Interface	USB 2.0
USB connector type	Micro-USB
Type	MP3 player
Languages support	CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, RUS, SWE
Firmware upgradeable	Yes
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth profiles	A2DP, AVRCP, HID, HSP, OPP, PAN
Built-in camera	No
Product color	Black
Volume control	Rotary
Housing material	Aluminum
Player media type	Flash memory
Total storage capacity	16 GB
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	256 GB
Music memory capacity (songs)	2400
Battery capacity	1630 mAh
Number of batteries supported	1
Continuous audio playback time	15 h
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Supported file systems	FAT, FAT32, exFAT
Audio formats supported	AAC, AIFF, ALAC, DSD, FLAC, MP3, WAV
Operating temperature (T-T)	5 - 35 °C
Headphone connectivity	2.5 mm / 3.5 mm
Impedance	600 Ω
Frequency range	20 - 80000 Hz
MP3 sample rates	44.1 - 48 kHz
Equalizer bands quantity	10
Signal-to-Noise Ratio (SNR)	115 dB
Total Harmonic Distortion (THD)	0.006 %
Package depth	39 mm
Package width	125 mm
Package height	140 mm
Package weight	270 g
Supported radio bands	Not supported

Weight and Dimensions

Depth	15 mm
Width	63 mm
Height	94 mm
Weight	130 g