EasyManuals Logo

Onkyo DP-S1 User Manual

Onkyo DP-S1
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background image
7
> Before Start > Part Names >Initial Setup >Playback
Advanced Setup | Supplementary Information | Others
En
1. Passcode
Set the pass code used to protect this unit. When you set a
pass code, the pass code screen is displayed when the
power is turned on or when restoring from display off. You
should create a pass code to protect your account if you are
going to use a network service.
1. Enter any four digit number. If you made a mistake with
an entry, tap " ".
2. Enter the pass code again to confirm.
0 If you enter the wrong pass code three times, a message
appears asking if you want to initialize the unit's settings.
Note that even if the settings are initialized, the copied
music files are not deleted.
2. Wi-Fi
Set to use network services such as TuneIn Radio on this
unit.
Wi-Fi can be connected in the following two ways.
Selecting SSID:
1. Tap the SSID of the access point you want to connect
from the SSID displayed.
0 If the SSID of the access point is not displayed, tap
"Other..." in the SSID list and follow the on screen
instructions to configure.
2. After tapping the field for entering the password, enter
the password of the access point, then tap "Connect".
For details on how to enter text, refer to "Entering text"
(P26).
3. " " is displayed on the status bar on the screen when
the connections are complete.
Using the push button:
0 The access point needs to have an automatic setting
button.
1. Tap "Push Button" on the screen and press the automatic
setting button on the access point.
0 The operation of the automatic setting button depends
on your device. Refer to the instruction manual of your
device for instructions.
2. " " is displayed on the status bar on the screen when
the connections are complete.
1st Step : Passcode
Do you wish to use passcode
lock?
No Yes
2nd Step : Wi-Fi
Do you wish to setup Wi-Fi?
No Yes
Wi-Fi
Choose a network...
SSID 1
SSID 2
Other...
Push Button
SN29403051_DP-S1_En_1704XX.book 7 207年月1日 曜日 午後時3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo DP-S1 and is the answer not in the manual?

Onkyo DP-S1 Specifications

General IconGeneral
InterfaceUSB 2.0
USB connector typeMicro-USB
TypeMP3 player
Languages supportCHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, RUS, SWE
Firmware upgradeableYes
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth profilesA2DP, AVRCP, HID, HSP, OPP, PAN
Built-in cameraNo
Product colorBlack
Volume controlRotary
Housing materialAluminum
Player media typeFlash memory
Total storage capacity16 GB
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size256 GB
Music memory capacity (songs)2400
Battery capacity1630 mAh
Number of batteries supported1
Continuous audio playback time15 h
Display diagonal2.4 \
Display resolution320 x 240 pixels
Supported file systemsFAT, FAT32, exFAT
Audio formats supportedAAC, AIFF, ALAC, DSD, FLAC, MP3, WAV
Operating temperature (T-T)5 - 35 °C
Headphone connectivity2.5 mm / 3.5 mm
Impedance600 Ω
Frequency range20 - 80000 Hz
MP3 sample rates44.1 - 48 kHz
Equalizer bands quantity10
Signal-to-Noise Ratio (SNR)115 dB
Total Harmonic Distortion (THD)0.006 %
Package depth39 mm
Package width125 mm
Package height140 mm
Package weight270 g
Supported radio bandsNot supported
Weight and Dimensions IconWeight and Dimensions
Depth15 mm
Width63 mm
Height94 mm
Weight130 g

Related product manuals