Onkyo DX DX-7555

22
Various Settings—Continued
To Return Each Setting to the Factory Default
1
Stop playback.
• The numbers of all the groups (fold-
ers) and the tracks should be indi-
cated on the display.
• The memory mode should be dese-
lected.
2
Press and hold the STOP button
until “SETUP MENU” appears on
the display (about a few sec-
onds).
When using the remote controller,
press the SETUP button.
3
Rotate the [ / ] dial in a
direction of clockwise or coun-
terclockwise to display [INITIAL-
IZE], and then press the [ / ]
dial.
When using the remote controller,
press the [ / ] buttons and then the
ENTER button.
4
Rotate the [ / ] dial in a
direction of clockwise or coun-
terclockwise to display [EXE-
CUTE].
When using the remote controller,
press the [ / ] buttons and then the
ENTER button.
To abort the INITIALIZE operation,
display [CANCEL].
Remote
controller
Remote
controller
Remote
controller
Remote
controller
5
Press the [ / ] dial.
When using the remote controller,
press the ENTER button.
If a disc is loaded, the DX-7555 will
start reading the disc from scratch.
Remote
controller