Onkyo ED-205 User Manual

AV Surround Processor
ED-205
AV SURROUND PROCESSOR
STANDBY/ON
STANDBY
EFFECT MODE
MASTER VOLUME
MULTI CH INPUT
LINE
VIDEO-1/2
ED-205
POWER
OFF
ON
Instruction Manual
Thank you for purchasing the ONKYO AV Surround
Processor.
Please read this manual thoroughly before making
connections and turning on the power.
Following the instructions in this manual will enable you
to obtain optimum performance and listening enjoyment
from your new AV Surround Processor.
Please retain this manual for future reference.
Contents
Before using
Important Safeguards ........................... 2
Precautions........................................... 3
Features ................................................ 4
Supplied accessories ............................ 4
Before using this unit ........................... 5
Operation
Using the remote controller ............... 11
Using the Surround modes................. 12
Playing a source ................................. 14
Preparation
Connecting the amplifier and video
equipment........................................... 6
Connecting equipment with 5.1-
channel audio output .......................... 7
Speaker placement and connection...... 8
Connecting the z remote control
cables................................................ 10
Connecting the power ........................ 10
A few important notes
Troubleshooting ................................. 17
Control positions and names.............. 18
Specifications..................................... 20

Onkyo ED-205 Specifications

Audio Amplifier

center power output (DIN)	22 W at 6 Ω 1kHz
surround power output (DIN)	22+22 W at 6 Ω 1kHz
center power output (EIAJ)	29 W at 6 Ω 1kHz
surround power output (EIAJ)	29+29 W at 6 Ω 1kHz
damping factor	40 at 8 Ω
input sensitivity/impedance	300 mV, 50 kΩ
output level/impedance	300 mV, 2.2 kΩ
muting	-40 dB
frequency response (center)	20 to 20, 000 Hz +/-1 dB
frequency response (surround)	100 to 7, 000 Hz +/-1 dB
total harmonic distortion (center)	0.8 %
total harmonic distortion (surround)	0.8 %
signal-to-noise ratio (center)	80 dB
signal-to-noise ratio (surround)	75 dB

Video

input sensitivity/impedance	1 Vp-p/75 Ω
output level/impedance	1 Vp-p/75 Ω
S-VIDEO input sensitivity/impedance	0.28 Vp-p/75 Ω
S-VIDEO output level/impedance	0.28 Vp-p/75 Ω

General Specifications

power consumption	65 W
power supply	AC 230 V, 50 Hz
alternate power supply	AC 120 V, 60 Hz
dimensions (W x H x D)	205 x 76 x 350 mm
weight	3.7 kg

Remote Control

control method	Infrared rays
control range	Approx. 5 meters
battery type	Size AA dry cell (1.5 V) x 2

Summary

Important Safeguards

Precautions

Features and Supplied Accessories

Before Operating This Unit

Installing Remote Controller Batteries

Instructions for inserting batteries into the remote control.

Using the Remote Controller

Guidance on how to operate the unit using the remote control.

Connecting the Amplifier and Video Equipment

Connecting the Amplifier

Details on connecting the amplifier to the ED-205's processor jacks.

Connecting Video Sources

How to connect video sources like disc players, tuners, VCRs, and monitors.

Connecting Equipment with 5.1-Channel Audio Output

Speaker Placement and Connection

Speaker Placement Guidelines

Guidelines for optimal speaker positioning and types for surround sound systems.

Connecting Speaker Cables

Step-by-step instructions for connecting speaker wires to the unit.

Speaker Impedance and Connection Details

Speaker Impedance Requirements

Information on speaker impedance requirements for optimal connection and performance.

Connecting Specific Speakers

Instructions for connecting Center, Surround speakers, and Subwoofer to the unit.

Connecting RI Cables

Connecting the Power

Using the Remote Controller

RI Compatible Component Operation

Explains buttons for operating connected Onkyo components via RI system.

Amplifier Operation Buttons

Explains power, sleep, and source selection buttons for the amplifier.

Other Component Operation Buttons

Explains remote control functions for connected components like MD recorders, tuners, and players.

Using the Surround Modes

Surround Mode Descriptions

Details on various surround sound modes available on the unit.

Special Speaker System Modes

Modes for systems with limited speaker configurations, including DOLBY 3 STEREO and STEREO.

Surround Play Setup

Necessary settings and configurations before using surround playback features.

Setting Surround Mode Delay Time

Playing a Source

Playing Dolby Pro Logic Surround Source

Steps to play and adjust Dolby Pro Logic encoded audio sources.

Playing Other Source Modes

Playing HALL, LIVE, or ARENA Surround Modes

How to play sources using HALL, LIVE, or ARENA surround modes and adjust levels.

Playing in Stereo Mode

Steps to play sources in standard stereo mode and adjust volume.

Playing Multi-Channel Input Source

Adjusting Multi-Channel Output Levels

Instructions for playing multi-channel audio sources and adjusting speaker output levels.

Troubleshooting

Control Positions and Names

Front Panel Controls

Identifies and explains buttons, indicators, and knobs on the unit's front panel.

Display Indicators

Explains the meaning of indicators and the multi-function display elements.

Remote Controller Layout

Specifications