Onkyo ED-205 User Manual

AV Surround Processor
ED-205
AV SURROUND PROCESSOR
STANDBY/ON
STANDBY
EFFECT MODE
MASTER VOLUME
MULTI CH INPUT
LINE
VIDEO-1/2
ED-205
POWER
OFF
ON
Instruction Manual
Thank you for purchasing the ONKYO AV Surround
Processor.
Please read this manual thoroughly before making
connections and turning on the power.
Following the instructions in this manual will enable you
to obtain optimum performance and listening enjoyment
from your new AV Surround Processor.
Please retain this manual for future reference.
Contents
Before using
Important Safeguards ........................... 2
Precautions........................................... 3
Features ................................................ 4
Supplied accessories ............................ 4
Before using this unit ........................... 5
Operation
Using the remote controller ............... 11
Using the Surround modes................. 12
Playing a source ................................. 14
Preparation
Connecting the amplifier and video
equipment........................................... 6
Connecting equipment with 5.1-
channel audio output .......................... 7
Speaker placement and connection...... 8
Connecting the z remote control
cables................................................ 10
Connecting the power ........................ 10
A few important notes
Troubleshooting ................................. 17
Control positions and names.............. 18
Specifications..................................... 20

Onkyo ED-205 Specifications

Audio Amplifier

center power output (DIN)	22 W at 6 Ω 1kHz
surround power output (DIN)	22+22 W at 6 Ω 1kHz
center power output (EIAJ)	29 W at 6 Ω 1kHz
surround power output (EIAJ)	29+29 W at 6 Ω 1kHz
damping factor	40 at 8 Ω
input sensitivity/impedance	300 mV, 50 kΩ
output level/impedance	300 mV, 2.2 kΩ
muting	-40 dB
frequency response (center)	20 to 20, 000 Hz +/-1 dB
frequency response (surround)	100 to 7, 000 Hz +/-1 dB
total harmonic distortion (center)	0.8 %
total harmonic distortion (surround)	0.8 %
signal-to-noise ratio (center)	80 dB
signal-to-noise ratio (surround)	75 dB

Video

input sensitivity/impedance	1 Vp-p/75 Ω
output level/impedance	1 Vp-p/75 Ω
S-VIDEO input sensitivity/impedance	0.28 Vp-p/75 Ω
S-VIDEO output level/impedance	0.28 Vp-p/75 Ω

General Specifications

power consumption	65 W
power supply	AC 230 V, 50 Hz
alternate power supply	AC 120 V, 60 Hz
dimensions (W x H x D)	205 x 76 x 350 mm
weight	3.7 kg

Remote Control

control method	Infrared rays
control range	Approx. 5 meters
battery type	Size AA dry cell (1.5 V) x 2