Onkyo HTX-22HDXPAW - Playing Your Components; Basic HTX-22 HDX Operation

28
Playing Your Components
1.
1
Press the HTX-22HDX’s [INPUT] button
repeatedly to select an input source.
To select an input source with the
remote controller, use its [INPUT
SELECTOR] buttons.
The input source will change 1 second
after you release the [INPUT] or [INPUT
SELECTOR] button.
2
Start playback on the source compo-
nent.
To watch a video source that’s connected
to an HDMI IN, on your TV, select the
video input that’s connected to the
HTX-22HDX’s HDMI OUT.
On some Blu-ray/DVD player/recorders,
you may need to change the digital or
HDMI audio output settings.
3
To adjust the volume, use the
HTX-22HDX’s VOLUME [
]/[] but-
tons, or the remote controller’s [VOL-
UME] buttons.
Since the HTX-22HDX is designed for
home theaters, it has a wide volume range
for precise adjustment. The volume can
be adjusted from Min, 1 through 79, or
Max.
You can limit the maximum volume with
the MaxVolume setting (see page 43).
4
Select a listening mode and enjoy!
See “Using the Listening Modes” on
page 32.
Note:
• You can change various settings in Setup
(see page 37).
Basic HTX-22HDX Operation
STANDBY
HDMI Thru
31
3
1