88
Advanced Setup—Continued
Component Video Input
See “Component Video Input Setup” on page 50.
Digital Audio Input
See “Digital Audio Input Setup” on page 51.
Analog Audio Input
Multich See “Analog Audio Input Setup” on page 52.
Subwoofer Input Sensitivity
0dB (default), 5dB, 10dB, 15dB
Some DVD players output the LFE channel from their analog subwoofer output at 15 dB higher than normal.
With this setting, you can change the AV controller’s subwoofer sensitivity to match your DVD player. Note
that this setting only affects signals connected to the AV controller’s MULTI CH: SUBWOOFER jack.
If you find that your subwoofer is too loud, try the 10 dB or 15 dB setting.
Balance See “Analog Audio Input Setup” on page 52.
Input Channel See “Analog Audio Input Setup” on page 52.
To Next Page
Loading...
Need help?
General
