Onkyo PR-SC5530

Advanced Settings
32
Setting Item Default Value Setting Details
Back Right 0.0dB Select a value between "-12.0dB" to "+12.0dB" (in
0.5dB increments). A test tone will be output each
time you change the value. Select the desired
level.
r
The setting is not displayed if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back ch" is set to other than
"1ch".
r
The setting cannot be changed if "Speaker
Settings" - "Front Speakers Type" is set to "Bi-
Amp".
Back Left 0.0dB Select a value between "-12.0dB" to "+12.0dB" (in
0.5dB increments). A test tone will be output each
time you change the value. Select the desired
level.
r
The setting is not displayed if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back ch" is set to other than
"1ch".
r
The setting cannot be changed if "Speaker
Settings" - "Front Speakers Type" is set to "Bi-
Amp".
Back 0.0dB Select a value between "-12.0dB" to "+12.0dB" (in
0.5dB increments). A test tone will be output each
time you change the value. Select the desired
level.
r
The setting is displayed only if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back ch" is set to "1ch".
r
The setting cannot be changed if "Speaker
Settings" - "Front Speakers Type" is set to "Bi-
Amp".
Surround Left 0.0dB Select a value between "-12.0dB" to "+12.0dB" (in
0.5dB increments). A test tone will be output each
time you change the value. Select the desired
level.
Setting Item Default Value Setting Details
Subwoofer 1 0.0dB Select a value between "-15.0dB" to "+12.0dB" (in
0.5dB increments). A test tone will be output each
time you change the value. Select the desired
level.
r
The setting cannot be changed if "Speaker
Configuration" - "Subwoofer" is set to "No".
Subwoofer 2 0.0dB Select a value between "-15.0dB" to "+12.0dB" (in
0.5dB increments). A test tone will be output each
time you change the value. Select the desired
level.
r
The setting cannot be changed if "Speaker
Configuration" - "Subwoofer" is set to "1ch" or
"No".
Height 1 Left 0.0dB Select a value between "-12.0dB" to "+12.0dB" (in
0.5dB increments). A test tone will be output each
time you change the value. Select the desired
level.
r
The setting cannot be changed if "Speaker
Settings" - "Height 1 Speakers Type" is set to
"Not Use".
Height 1 Right 0.0dB Select a value between "-12.0dB" to "+12.0dB" (in
0.5dB increments). A test tone will be output each
time you change the value. Select the desired
level.
r
The setting cannot be changed if "Speaker
Settings" - "Height 1 Speakers Type" is set to
"Not Use".
Height 2 Right 0.0dB Select a value between "-12.0dB" to "+12.0dB" (in
0.5dB increments). A test tone will be output each
time you change the value. Select the desired
level.
r
This setting cannot be changed in any of the
following cases.
– "Speaker Settings" - "Height 2 Speakers
Type" is set to "Not Use".
– "Speaker Settings" - "Front Speakers Type"
is set to "Bi-Amp".