Onkyo PR-SC5530

Advanced Settings
40
Setting Item Default Value Setting Details
Fixed Mode Off
Specify an input signal when "HDMI", "COAXIAL
(Coaxial input) ", or "OPTICAL (Optical input) " is
selected for "Audio Selector". Set this item if noise
is produced, or truncation occurs at the beginning
of a track that follows a gap when playing PCM or
DTS sources.
"Off": To play an analog signal when there is no
digital signal.
"PCM": To fix the input source to PCM (except
for Multichannel PCM).
"DTS": To fix the input source to DTS (except for
DTS-HD).
r
Changing "Audio Selector" changes the
setting to "Off".
Balance Input Stereo
Select "Stereo" when the input source is stereo
and "Mono" when monaural.
r
The setting can be selected only when
"Balance" is selected for "Audio Selector".
r
The setting cannot be changed when "PHONO", "TUNER", "NET", "USB" or "BLUETOOTH" input is
selected or the WHOLE HOUSE MODE function is on.
5.Listening Mode Preset
You can preset your favorite listening mode to each input. (For example, you can always
apply straight decode to the Dolby TrueHD source of Blu-ray Disc to play it in unchanged
sound field.)
When the list of input sources is displayed, set the signal type and listening mode.
Although it is possible to select the listening mode during playback, the selected mode will
be reset when the unit enters standby mode.
Setting Item Default Value Setting Details
Analog/PCM Last Valid Set the listening mode for playing PCM signals
of CD and analog signals of record and cassette
tape.
Mono/Multiplex
Source
Last Valid Set the listening mode for playing Dolby Digital
and other digital signals recorded in monaural or
multiplex audio.
2ch Source Last Valid Set the listening mode for playing Dolby Digital
and other digital signals recorded in 2 channels.
Dolby D/Dolby D
Plus/TrueHD
Last Valid Set the listening mode for playing Dolby Digital,
Dolby Digital Plus and Dolby TrueHD signals.
DTS/DTS-ES/DTS-
HD
Last Valid Set the listening mode for playing digital audio
signals in DTS and DTS-HD High Resolution
formats. Select the listening mode specified for
Blu-ray or such other DTS-HD Master Audio
source.
Other Multich Source Last Valid Set the listening mode for playing DSD signals
of DVD-Audio and Super Audio CD that are
input from HDMI IN jack.
r
Available listening modes vary depending on the input signal.
r
Setting "Last Valid" will always select the last selected mode.
r
Only "Analog" can be set to the "TUNER" input.
r
"Digital" and "TrueHD" can be set to the "NET" and "USB" inputs.
r
Only "Digital" can be set to the "BLUETOOTH" input.