Advanced Settings
39
Setting Item Default Value Setting Details
Saturation 0 Adjust saturation of the screen. Select a value
from "-50" to "+50".
Color Temperature Normal Set color temperature of the screen. Select from
"Warm", "Normal" and "Cool".
Gamma 0 Adjust the relative relation between the R (red),
G (green) and B (blue) data signals of the input
image and those of the output image. Select a
value from "-3" to "+3".
Red Brightness 0 Adjust the brightness of red of the screen.
Select a value from "-50" to "+50".
Red Contrast 0 Adjust the contrast of red of the screen.
Select a value from "-50" to "+50".
Green Brightness 0 Adjust the brightness of green of the screen.
Select a value from "-50" to "+50".
Green Contrast 0 Adjust the contrast of green of the screen.
Select a value from "-50" to "+50".
Blue Brightness 0 Adjust the brightness of blue of the screen.
Select a value from "-50" to "+50".
Blue Contrast 0 Adjust the contrast of blue of the screen.
Select a value from "-50" to "+50".
r
If "NET" or "USB" is selected, the settings for "Picture Adjust" cannot be changed.
r
Press CLR on the remote controller if you return all the settings from "Game Mode" through "Blue
Contrast" to their default value.
Audio Selector
Make the audio input setting. The setting can be separately set to each input selector
button. Select the input selector to configure.
Setting Item Default Value Setting Details
Audio Selector – Allows you to select prior input source.
"ARC": When giving priority to input signal from
ARC compatible TV.
r
The setting can be selected only when
Return Channel" is set to "Auto" and also the
"TV/CD" input is selected.
"HDMI": When giving priority to input signal from
HDMI jacks
r
The setting can be selected only when the
input is assigned to the HDMI IN jack in the
"HDMI Input" setting.
"COAXIAL" (Coaxial input): When giving priority
to input signal from COAXIAL IN jacks.
r
The setting can be selected only when the
input is assigned to the COAXIAL jack in the
"Digital Audio Input" setting.
"OPTICAL" (Optical input): When giving priority
to input signal from OPTICAL IN jacks.
r
The setting can be selected only when the
input is assigned to the OPTICAL jack in the
"Digital Audio Input" setting.
"Analog": To always output analog audio
independently of the input signal
"Balance": When giving a higher priority to an
input from the balanced jack
To Next Page
Loading...
Need help?
General
