Onkyo PR-SC885 User Manual

112
Zone 2 and Zone 3 —Continued
Turning Off Zones
Adjusting the Volume of Zones
Adjusting the Balance of Zones
1
On the remote controller, press
the [ZONE 2] or [ZONE 3]
REMOTE MODE button.
On the AV controller, press the
[ZONE 2] or [ZONE 3] button.
The ZONE 2 or ZONE 3 indicator
flashes.
2
On the remote controller, press
the [STANDBY] button.
On the AV controller, press the
[OFF] button.
The zone is turned off, and the ZONE 2
or ZONE 3 indicator goes off.
On the remote controller, press
the [ZONE 2] or [ZONE 3]
REMOTE MODE button, and then
use the [LEVEL–] and [LEVEL+]
buttons.
On the AV controller, press the
[ZONE 2] or [ZONE 3] button,
press the [LEVEL] button, and
then use the Up [ ] and Down
[] buttons.
ZONE 2
ZONE 3
ZONE 3
ZONE 2
AV controller
Remote
controller
OFF
STANDBY
AV controller
Remote
controller
ZONE 3
ZONE 2
LEVEL LEVEL
AV controller
Remote
controller
ZONE 2
ZONE 3
1
On the AV controller, press the
[ZONE 2] or [ZONE 3] button.
2
Press the AV controller’s [TONE]
button repeatedly to select Bal-
ance.
3
Use the Up [ ] and Down [ ]
buttons to adjust the balance.
You can adjust the balance from 0 in the
center to +10 dB to the right or +10 dB
to the left in 2 dB steps.
ZONE 2
ZONE 3
AV controller
TONE
PR-SC885En.book Page 112 Tuesday, February 26, 2008 2:07 PM

Onkyo PR-SC885 Specifications

General

Brand	Onkyo
Model	PR-SC885
Category	Controller
Language	English