2
1.
CONTROL INTERFACE OVERVIEW ..................................3
1.1.Hardware Overview...........................................3
1.2.Message Overview............................................3
Receive Message Format ........................................3
Send Message Format ...........................................3
Special Character .............................................3
2.1.Command Communication.......................................4
2.2.Question Communication......................................4
2.3.Event Notice Communication..................................4
3.COMMAND DESCRIPTIONS ...........................................5
3.1.System Power Command "PWR"..................................5
3.2.Audio Muting Command "AMT"..................................5
3.3.Speaker A/B Command "SPA"/’’SPB’’ ...........................5
3.4.Master Volume Command "MVL".................................5
3.5.Input Selector Command "SLI"................................6
3.6.Listening Mode Command "LMD"................................7
3.7.Late Night Command "LTN"....................................7
3.8.Re-EQ Command "RAS".........................................7
3.9.Tuning Command "TUN"........................................8
3.10.Preset Command "PRS".......................................8
3.11.Display Mode Command "DIF".................................9
3.12.Dimmer Level Command "DIM".................................9
3.13.Setup Operation Command "OSD"..............................9
3.14.CD Player Operation Command ‘‘CCD’’ .......................10
3.15.TAPE1(A) Operation Command "CT1"..........................11
3.16.TAPE2(B) Operation Command "CT2"..........................11
3.17.Graphics Equalizer Operation Command "CEQ"................11
3.18.DAT Recorder Operation Command "CDT"......................12
3.19.DVD Player Operation Command "CDV"........................12
3.20.MD Recorder Operation Command "CMD".......................14
3.21.CD-R Recorder Operation Command "CCR".....................15