5
3.COMMAND DESCRIPTIONS
3.1.System Power Command "PWR"
Commands to set or get the system-power status.
Parameter List (Characters/Means) :
"00" sets System Standby
"01" sets System On
"QSTN" gets the System Power State
3.2.Audio Muting Command "AMT"
Commands to set or get the audio-muting status.
Parameter List (Characters/Means) :
"00" sets Audio Muting Off
"01" sets Audio Muting On
"QSTN" gets the Audio Muting State
3.3.Speaker A/B Command "SPA"/”SPB”
Commands to set or get the speaker out status.
Parameter List (Characters/Means) :
"00" sets Speaker Off
“01” sets Speaker On
"UP" sets Speaker Switch Wrap-Around Up
"QSTN" gets the Speaker State
3.4.Master Volume Command "MVL"
Commands to set or get the master volume status.
Parameter List (Characters/Means) :
"00"-"50" sets Volume Level 0 - 80 ( In hexadecimal representation)
"UP" sets Volume Level Up
"DOWN" sets Volume Level Down
"QSTN" gets the Volume Level
To Next Page
Loading...
Need help?
General