Onkyo RS232 CONTROL SYSTEM - Listening Mode Command LMD; Late Night Command LTN; Re-EQ Command RAS

7
3.6.Listening Mode Command "LMD"
Commands to set or get the listening mode status.
Parameter List (Characters/Means) :
"00" sets STEREO
"01" sets DIRECT
"02" sets SURROUND
"08" sets ORCHESTRA
"09" sets UNPLUGGED
"0A" sets STUDIO-MIX
"0B" sets TV LOGIC
"0C" sets ALL CH STEREO
"UP" sets Listening Mode Wrap-Around Up
"DOWN" sets Listening Mode Wrap-Around Down
"QSTN" gets The Listening Mode
3.7.Late Night Command "LTN"
Commands to set or get the late night with the parameter In this message.
Parameter List (Characters/Means) :
"00" sets Late Night Off
"01" sets Late Night Low
"02" sets Late Night High
"UP" sets Late Night State Wrap-Around Up
"QSTN" gets The Late Night Level
3.8.Re-EQ Command "RAS"
Commands to set or get the Re-EQ status.
Parameter List (Characters/Means) :
"00" sets Re-EQ Off
"01" sets Re-EQ On
"UP" sets Re-EQ State Wrap-Around Up
"QSTN" gets The Re-EQ State