To Next PageTo Next Page
Need help?Do you have a question about the Onkyo SKC-340C and is the answer not in the manual?
General| Brand | Onkyo |
|---|---|
| Model | SKC-340C |
| Category | Home Theater System |
| Language | English |
Details regulatory compliance information for US models regarding digital devices and interference.
Guidelines for optimal speaker placement to ensure sound quality and prevent damage.
Advice on positioning speakers near displays to avoid picture distortion.
Cautionary note about specific audio signals that may damage speaker coils.
Instructions on adjusting the voltage selector for compatibility with local power systems.
Guide on how to insert batteries into the remote controller correctly.
Basic instructions on aiming and operating the remote control.
Detailed identification and explanation of controls and indicators on the AV receiver's front panel.
Explanation of the various indicators and information shown on the AV receiver's display.
Description of all input and output jacks located on the rear of the AV receiver.
Instructions on how to use the remote controller with different components and modes.
Details on using the remote to control a DVD player, including button functions.
Details on using the remote to control a CD player, including button functions.
Details on using the remote to control MD or CDR recorders, including button functions.
Details on using the remote to control an HDD component, including button functions.
Details on using the remote to control a cassette deck, including button functions.
Guidance on using two sets of speakers for different listening environments and playback modes.
Important safety and setup guidelines before connecting speakers to the receiver.
Step-by-step instructions for connecting speaker wires to the receiver's terminals.
Instructions for wall-mounting front, center, and surround speakers.
Information on using threaded inserts for mounting speakers with brackets.
Advice on using rubber stoppers for speaker stability and sound isolation.
Guide for assembling and connecting the supplied AM loop antenna.
Instructions for connecting the supplied indoor FM antenna for optimal reception.
Guidance on connecting a commercially available outdoor FM antenna for better reception.
Instructions for connecting an outdoor AM antenna for improved AM reception.
Information on using an antenna splitter to share reception between TV and FM.
General advice and considerations before connecting AV components to the receiver.
Explanation of the optical digital jacks, including shutter operation and connection tips.
Overview of common AV connection types, color coding, and cable specifications.
How to connect both audio and video from components simultaneously for ease of use.
Guidance on selecting appropriate video and audio connection formats for optimal quality.
Step-by-step video connection guide for a DVD player to the receiver and TV.
Instructions for connecting digital and analog audio outputs from a DVD player.
Guide for connecting a VCR for video and audio playback through the receiver.
Instructions on how to connect a VCR for recording video and audio signals.
Specific steps for connecting a VCR for recording purposes.
Instructions for connecting camcorders, game consoles, and other video sources.
Guide for connecting satellite, cable, or other video sources to the receiver.
How to connect CD players or turntables with built-in phono preamps to the receiver.
Instructions for connecting HDD-compatible components for audio playback.
Guide for connecting various types of audio recorders to the receiver.
Details on using the Remote Interactive (RI) connection for controlling Onkyo components.
Instructions for safely connecting the AV receiver's power cord to a power source.
Steps to power on the AV receiver using the unit or remote control.
Key steps for ensuring smooth operation after initial setup, including input and speaker checks.
How to assign digital audio inputs (optical/coaxial) to specific input sources.
Procedure to change input display settings for RI-capable components.
Fundamental operations for playing components, selecting sources, speakers, and adjusting volume.
How to connect and use components with 5.1-channel analog audio outputs.
How to view information about the current input source, signal format, and listening mode.
Introduction to using the built-in AM/FM tuner and storing favorite stations.
Methods for tuning into radio stations using Auto or Manual tuning modes.
Procedure to set the AM frequency step according to regional standards.
Steps to store up to 30 favorite radio stations as presets for quick selection.
Instructions on how to remove stored radio presets.
How to view information such as band, frequency, and listening mode for tuned stations.
How to quickly select a stored radio station using preset buttons.
Explanation of Radio Data System (RDS) features available in European models.
Details on PS, RT, PTY, and TP information provided by RDS-enabled radio stations.
How to view text information broadcast by RDS stations.
Method for searching for radio stations based on their program type category.
How to find and listen to stations broadcasting Traffic Program (TP) information.
Instructions on connecting headphones and their impact on speaker output.
How to customize low and high frequency sound levels for speaker set A.
Adjusting the brightness level of the AV receiver's front panel display.
Setting the AV receiver to automatically turn off after a specified period.
Activating the equalizer for enhanced sound with specific speaker packages.
Temporarily silencing the audio output of the AV receiver.
Calibrating the volume level for each individual speaker for balanced sound.
How to record audio and video from selected input sources to compatible components.
Procedure for overdubbing audio from one source onto video from another.
Guide to choosing appropriate listening modes based on input signal format and desired sound.
Detailed explanations of the various surround sound and DSP listening modes available.
Accessing and adjusting audio settings like multiplex and mono channel output.
Adjusting Panorama, Dimension, and Center Width for Pro Logic II Music mode.
Configuring Center Image settings for DTS Neo:6 Music listening mode.
Reducing dynamic range for Dolby Digital audio for quieter listening.
Softening bright movie soundtracks for a more pleasant listening experience.
Overview of advanced speaker configuration options available in the setup menu.
Setting speaker distances to ensure synchronized audio arrival at the listening position.
Calibrating the volume level for each individual speaker for balanced sound.
Specifying speaker size (Small/Large) and presence (Yes/No/None) for proper sound processing.
Setting the crossover frequency based on speaker size for optimal bass management.
Enabling the Double Bass feature to enhance low-frequency output to the subwoofer.
Manually setting the digital input format (PCM/DTS) if automatic detection fails.
Adjusting audio delay to synchronize sound with video, especially with progressive scan.
Solutions for common problems related to powering the AV receiver on or off.
Troubleshooting steps for issues like no sound, quiet audio, or incorrect speaker output.
Steps to resolve problems related to the absence of a video picture.
Tips for improving FM/AM reception and resolving static or hiss.
Steps for when the remote controller does not work or fails to control other components.
Solutions for problems encountered during audio and video recording processes.
Tips for headphone sound changes, multiplex language, and RI function.
Detailed technical data for the AV receiver's amplifier performance and power output.
Technical details regarding video input/output capabilities and frequency response.
Technical data for the FM and AM tuner performance, sensitivity, and frequency ranges.
Overall system specifications including power supply, consumption, dimensions, and weight.
Technical data for the included front, center, surround, and subwoofer speakers.
