Onkyo T-405X User Manual

28
7 Press the STANDBY/ON button on
the Amplifier A-905X to set the
STANDBY mode.
STEREO
TIMER
REC
STANDBY/ON
STANDBY
(A-905X)
Notes
• Since muting is automatically turned on when
the timer is used to record, the sound cannot
be heard during recording. To monitor recording,
press the MUTING button on the remote
controller to cancel muting.
• Timer recording is activated once. After
recording, the REC mode setting will be
cancelled.
• After setting the timer, be sure to set the
amplifier in STANDBY mode. If the amplifier is
not in STANDBY mode, the timer will not work.
• Make sure that the POWER switch on the A-
905X Amplifier is set to ON.
Switching the timer ON/OFF
You can switch the timer ON/OFF to cancel the
timer setting, to enable the timer again, or to
perform timer recording again.
When the Timer function is enabled, the selected
timer mode such as “WEEKDAY”, “WEEKEND”, and
“REC” appears in the upper left corner of the display.
Note
To switch the timer ON, first you need to program
the time value.
1 Press the TIMER button repeatedly
until the timer mode (WEEKDAY,
WEEKEND or REC) that you wish to
enable or disable appears on the
upper left corner of the display.
TIMER
2 Press the PRESET √ or ® button to
switch the selected mode ON or
OFF.
AUTOTIMER
W.DAY
PRESET
3 Press the MEMORY button to con-
firm the selection.
MEMORY
T-405X
FM STEREO / AM TUNER
MEMORYTIMERBAND CLEAR
AUTO/ MONO
STANDBY/ON
TUNING
PRESET
CHARACTERDISPLAY
ENTER
UP/DOWN
MEMORY
√PRESET®
TIMER
TIMER
POWER
CLOCK CALL
TUNER
PRESET
SLEEP
FM AM
REPEAT SCROLL
PLAY MODE CLEAR
REC
REPEAT RANDOM
MEMORY CLEAR
TIMER
1
ACOUSTIC
PRESENCE
DVD
2
DISC
CD/MD
EFFECT
PAUSE/STEP
3
456
UP/DOWN
789
ENTER - - / - - - 10/0 MUTING
VOLUME
G.EQUALIZER
TAPE
MODE
INPUT SELECTOR
MD
CD
RC-398SREMOTE CONTROLLER
The remote con-
troller comes with
the Onkyo A-905X
amplifier.
Using the timer

Onkyo T-405X Specifications

FM Specifications

FM tuning range (U.S. & Canadian models)	87.90 – 107.90 MHz, 200 kHz steps
FM tuning range (Other area models)	87.50 – 108.00 MHz, 50 kHz steps
FM usable sensitivity (Mono)	12.8 dBf 1.2 µV, 75 Ohms IHF
FM usable sensitivity (Stereo)	19.2 dBf 2.5 µV, 75 Ohms IHF
FM 50dB quieting sensitivity (Mono)	18.0 dBf 2.2 µV, 75 Ohms
FM 50dB quieting sensitivity (Stereo)	38.0 dBf 22 µV, 75 Ohms
FM capture ratio	1.5 dB
FM image rejection ratio	85 dB
FM IF rejection ratio	90 dB
FM signal-to-noise ratio (Mono)	73 dB IHF
FM signal-to-noise ratio (Stereo)	66 dB IHF
FM selectivity	50 dB DIN (±300 kHz, 40 kHz dev.)
FM AM suppression ratio	50 dB
FM total harmonic distortion (Mono)	0.5%
FM total harmonic distortion (Stereo)	0.8%
FM frequency response	30 – 15, 000 Hz (±1.5 dB)
FM stereo separation	40 dB at 1 kHz, 30 dB at 70 – 10, 000 Hz
FM output level (U.S. & Canadian models)	0.5 V
FM output level (Other area models)	0.75 V
FM muting level	17.2 dBf 2.0 µV, 75 Ohms

AM Specifications

AM tuning range	530 – 1, 710 kHz, 10 kHz steps
AM usable sensitivity	30 µV
AM image rejection ratio	30 dB
AM IF rejection ratio	40 dB
AM signal-to-noise ratio	40 dB
AM total harmonic distortion	0.8%
AM output level	0.15 V

General Specifications

Power supply (AC 120 V)	60 Hz
Power supply (AC 230 V)	50 Hz
Power consumption	9 W
Dimensions	205 × 76 × 279 mm
Dimensions (inches)	8-1/16" × 3" × 11"
Weight	1.7 kg
Weight (lbs)	3.7 lbs.