Onkyo T-405X User Manual

29
Before Using
Connections
Other Information
Operation
Notes for timer setting
• Make sure that the clock has been set correctly
before setting the timer.
• After setting the timer, be sure to set the
apmlifier in standby mode. If the amplifier is not
in standby mode, the timer will not work.
• When the power is turned on by one of the
timer mode settings, the other timer modes may
not be activated at their ON time. The power
will be switched off by the first timer mode at
its OFF time. (See the figure below.)
• If you press the SLEEP button during timer play
or timer recording, the power will be switched
off at the SLEEP timer’s OFF time.
• If more than two timer mode settings are made
at the same time, the “WEEKDAY” setting has
the priority over the “WEEKEND” setting. The
“REC” mode setting has no priority.
• The timer recording setting will be cancelled if
the recording does not start at the ON time (for
example, if the power is already on).
WEEKDAY
REC
WEEKEND
activate
activate
Time
ON
9:00
OFF
10:00
ON
11:00
OFF
12:00
not activate
Sleep function
The Sleep function can be performed only by using
remote controller that comes with the amplifier
A-905X.
The SLEEP timer automatically sets the entire
system to standby mode after a specified period
of time.
1 Start playing something you would
like to listen to.
(CD, tape, MD or radio broadcast).
2 Press the SLEEP button repeatedly
to set the desired sleep time.
STEREO
MIN
AUTOTIMER
SLEEP
SLEEP
The time value will decrease from 90 minutes
to 10 minutes in steps of 10 minutes.
After a specified period of time, the power
will be switched off automatically.
• To check the remaining time while the SLEEP
function is active, press the SLEEP button.
Cancelling the SLEEP setting
Press the SLEEP button repeatedly until the SLEEP
indicator on the display disappears.
POWER
CLOCK CALL
TUNER
PRESET
SLEEP
FM AM
REPEAT SCROLL
PLAY MODE CLEAR
REC
REPEAT RANDOM
MEMORY CLEAR
TIMER
1
ACOUSTIC
PRESENCE
DVD
2
DISC
CD/MD
EFFECT
PAUSE/STEP
3
456
UP/DOWN
789
ENTER - - / - - - 10/0 MUTING
VOLUME
G.EQUALIZER
TAPE
MODE
INPUT SELECTOR
MD
CD
RC-398SREMOTE CONTROLLER
SLEEP
The remote con-
troller comes with
the Onkyo A-905X
amplifier.

Onkyo T-405X Specifications

FM Specifications

FM tuning range (U.S. & Canadian models)	87.90 – 107.90 MHz, 200 kHz steps
FM tuning range (Other area models)	87.50 – 108.00 MHz, 50 kHz steps
FM usable sensitivity (Mono)	12.8 dBf 1.2 µV, 75 Ohms IHF
FM usable sensitivity (Stereo)	19.2 dBf 2.5 µV, 75 Ohms IHF
FM 50dB quieting sensitivity (Mono)	18.0 dBf 2.2 µV, 75 Ohms
FM 50dB quieting sensitivity (Stereo)	38.0 dBf 22 µV, 75 Ohms
FM capture ratio	1.5 dB
FM image rejection ratio	85 dB
FM IF rejection ratio	90 dB
FM signal-to-noise ratio (Mono)	73 dB IHF
FM signal-to-noise ratio (Stereo)	66 dB IHF
FM selectivity	50 dB DIN (±300 kHz, 40 kHz dev.)
FM AM suppression ratio	50 dB
FM total harmonic distortion (Mono)	0.5%
FM total harmonic distortion (Stereo)	0.8%
FM frequency response	30 – 15, 000 Hz (±1.5 dB)
FM stereo separation	40 dB at 1 kHz, 30 dB at 70 – 10, 000 Hz
FM output level (U.S. & Canadian models)	0.5 V
FM output level (Other area models)	0.75 V
FM muting level	17.2 dBf 2.0 µV, 75 Ohms

AM Specifications

AM tuning range	530 – 1, 710 kHz, 10 kHz steps
AM usable sensitivity	30 µV
AM image rejection ratio	30 dB
AM IF rejection ratio	40 dB
AM signal-to-noise ratio	40 dB
AM total harmonic distortion	0.8%
AM output level	0.15 V

General Specifications

Power supply (AC 120 V)	60 Hz
Power supply (AC 230 V)	50 Hz
Power consumption	9 W
Dimensions	205 × 76 × 279 mm
Dimensions (inches)	8-1/16" × 3" × 11"
Weight	1.7 kg
Weight (lbs)	3.7 lbs.