Onkyo T-411RDS-409 User Manual

Important safeguards
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions should
be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the operat¬
ing instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should be
followed.
5. Water and Moisture - The appliance should not be used near
water - for example, near a bathtub, washbowl, kitchen sink, laundry
tub, in a wet basement, or near a swimming pool, and the like.
6. Carts and Stands - The appliance should be used only with a cart
or stand that is recommended by the manufacturer.
6A. An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.
PORTABLE CART WARNING
7. Wall or Ceiling Mounting - The appliance should be mounted to
a wall or ceiling only as recommended by the manufacturer.
8. Ventilation - The appliance should be situated so that its location or
position does not interfere with its proper ventilation. For example, the
appliance should not be situated on a bed, sofa, rug, or similar surface
that may block the ventilation openings; or, placed in a built-in instal¬
lation, such as a bookcase or cabinet that may impede the flow of air
through the ventilation openings.
9. Heat - The appliance should be situated away from heat sources such
as radiators, heat registers, stoves, or other appliances (including
amplifiers) that produce heat.
10. Power Sources - The appliance should be connected to a power
supply only of the type described in the operating instructions or as
marked on the appliance.
11. Polarization - If the appliance is provided with a polarized plug
having one blade wider than the other, please read the following infor¬
mation: The polarization of the plug is a safety feature. The polarized
plug will only fit the outlet one way. If the plug does not fit fully into
the outlet, try reversing it. If there is still trouble inserting it, the user
should seek the services of a qualified electrician. Under no circum¬
stances should the user attempt to defeat the polarization of the plug.
12. Power-Cord Protection - Power-supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them, especially near plugs, convenience receptacles,
and the point where they exit from the appliance.
13. Cleaning - The appliance should be cleaned only as recommended
by the manufacturer.
14. Power Lines - An outdoor antenna should be located away from
power lines.
15. Nonuse Periods - The power cord of the appliance should be
unplugged from the outlet when left unused for a long period of time.
16. Object and Liquid Entry - Care should be taken so that objects do
not fall and liquids are not spilled into the enclosure through openings.
17. Damage Requiring Service - The appliance should be serviced
by qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance;
or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a
marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
18. Servicing - The user should not attempt to service the appliance
beyond that described in the operating instructions. All other servicing
should be referred to qualified service personnel.
19. Outdoor Antenna Grounding - If an outside antenna is con¬
nected to the receiver, be sure the antenna system is grounded so as to
provide some protection against voltage surges and built up static
charges. Article 810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna dis¬
charge unit, size of grounding conductors, location of the antenna-dis¬
charge unit, connection to grounding electrodes, and requirements for
the grounding electrode. See Figure 73.1.
FIGURE 73.1:
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL
ELECTRICAL CODE
NEC - NATIONAL ELECTRICAL CODE
S2898A
Precautions
1. Warranty Card
The serial number is written on the rear panel of this unit. Copy
the serial number and model number onto your warranty card and
keep it in a safe place.
2. Care
From time to time you should wipe the front and rear panels and
the cabinet with a soft cloth. For heavier dirt, dampen a soft cloth
in a weak solution of mild detergent and water, wring it out dry,
and wipe off the dirt. Following this, dry immediately with a clean
cloth. Do not use rough material, thinners, alcohol or other chemi¬
cal solvents or cloths since these could damage the finish or
remove the panel lettering.
3. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,
READ THE FOLLOWING SECTION CAREFULLY.
• Some models are designed for use only with the power supply
voltage of the region where they are sold.
European model (except U.K.): AC 230V, 50Hz
U.K. and Australian models: AC 240V, 50Hz
U.S.A. and Canadian models: AC 120V, 60Hz
Worldwide model: AC 120V/220V switchable,
50/60Hz
• Voltage Selector (Rear Panel)
Worldwide models are equipped with a voltage selector to con¬
form with local power supplies. Be sure to set this switch to
match the voltage of the power supply in your area before turn¬
ing the power button on. (See “Setting the voltage selector and
Tuning step frequency (Worldwide models only)”, P. 5.) Mod¬
els without a voltage selector can only be used in areas where
the power supply is the same as that of the unit.

Onkyo T-411RDS-409 Specifications

General

Brand	Onkyo
Model	T-411RDS-409
Category	Tuner
Language	English