To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-811 and is the answer not in the manual?
General| Power Output | 50 W per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD) |
|---|---|
| Channels | 2 |
| Frequency Response | 10 Hz - 100 kHz (+1 dB, -3 dB) |
| Signal-to-Noise Ratio | 80dB (MM), 100dB (line) |
| Dimensions | 435 x 144 x 358mm |
| Weight | 8.2kg |
| Tuning range | FM, MW |
| Input sensitivity (MM) | 2.5mV |
| Input sensitivity (line) | 150mV |
| Signal to noise ratio (MM) | 80dB |
| Signal to noise ratio (line) | 100dB |
| Amplifier Type | Stereo Receiver |
| Total Harmonic Distortion (THD) | 0.08% |
| Input Sensitivity | 150 mV (line), 2.5 mV (MM) |
| Speaker load impedance | 8Ω to 16Ω |
| Speaker Impedance | 8Ω to 16Ω |
Important warnings and instructions regarding power supply voltage and proper use.
Details on how to use the voltage selector on worldwide models to match local power supplies.
Instructions for connecting speakers, emphasizing proper polarity and cable selection.
Explains how to connect and use the RI remote control for cassette decks and CD players.
Overview of the buttons, knobs, and jacks located on the front panel of the unit.
Explanation of the various indicators and displays on the unit, such as memory, stereo, and frequency displays.
Step-by-step guide to powering on, selecting speakers, input sources, and adjusting volume/tone.
How to tune into FM or AM stations using tuning selector buttons or auto-tuning.
Explanation of the APR system's automatic RF stage gain and mode selection for FM reception.
Instructions on how to store up to 30 FM and AM stations in memory for instant recall.
A guide listing common troubles, their causes, and recommended remedies.
Detailed technical specifications for the amplifier section, including power output and distortion.
Technical details for the FM and AM tuner sections, including tuning range and sensitivity.
Information on power supply, dimensions, weight, and remote control transmitter details.
