Onkyo TX-820 - Page 12

Specification
AMPLIFIER SECTION
Power Output:
Musical Power Output:
Continuous Power Output:
Total Harmonic Distortion:
{M Distortion:
Damping Factor:
Frequency Response:
RIAA Deviation:
Sensitivity and Impedance:
Phono Overload:
Signal-to-Noise Ratio:
Tone Controls:
Muting:
TUNER SECTION
FM:
Tuning Range:
Usable Sensitivity:
50dB Quieting Sensitivity:
Capture Ratio:
Image Rejection Ratio:
IF Rejection Ratio:
Signal -to-Noise Ratio:
Selectivity
AM Suppression Ratio:
Harmonic Distortion:
Frequency Response:
Stereo Separation:
AM:
Tuning Range:
Usable Sensitivity:
Image Rejection Ratio:
IF Rejection Ratio:
Signal -to-Noise Ratio:
Harmonic Distortion:
GENERAL
Power Supply:
Dimensions (W x H x D):
Weight:
TX-820
40 watts per channel, min. RMS, at 8 ohms, both
channels driven, from 40Hz to 20kHz, with no more
than 0.3% THD.
2 x 95 watts at 4 ohms, 1kHz (DIN)
2 x 68 watts at 8 ohms, 1kHz (DIN)
2 x 50 watts at 4 ohms, 1kHz (DIN)
2 x 45 watts at 8 ohms, TkHz (DIN)
0.3% at rated power
0.1% at 30 watt output
0.3% at rated power
0.1% at 30 watt output
35 at 8 ohms
20 - 30,000 Hz + 1dB
20 — 20,000 Hz + 0.8dB
Phono: 2.5mV/50 kohms
CD/Tape Play: 150mV/50 kohms
Tape Rec: 150mV/3.5 kohms
120mV RMS at 1kHz, 0.3% THD
Phono: 85dB (at 10mV input, A weighted)
75dB (IHF A-202)
CD/Tape: 95dB (A weighted)
80dB (JHF A-202)
Bass: + 10dB at 100Hz
Treble: + 10dB at 10kHz
a. OS
87.5 - 108.0MHz (50kHz steps)
Mono: 12.4dBf, 1.2HV, 75 ohms
1.2nV (S/N 26dB, 40kHz Devi.)
75 ohms DIN
Stereo: 19.2dBf, 2.5uV, 75 ohms
25pV (S/N 46dB, 40kHz Devi.)
75 ohms DIN
Mono: 18.2dBf, 2.2uV, 75 ohms
Stereo: 38.2dBf, 22uV, 75 ohms
1.5dB
85dB
90dB8
Mono: 70dB
Stereo: 65dB
50dB DIN (+300kHz, 40kHz dev.)
50dB
Mono: 0.15%
Stereo: 0.30%
30 - 15,000Hz + 1.5dB
40dB at 1kHz
30dB at 100 - 10,000Hz
522 - 1611kHz (9kHz steps)
30nV
40dB
40dB
40dB
0.8%
European models: AC220V, 50Hz
Canadian models: AC120V, 60Hz
U.K& Australian models: AC 240V, 50Hz
Worldwide models: 120 and 220V switchable, 50/60Hz
435 x 115 x 320 mm
17-1/8" x 4-1/2” x 12-9/16"
6.7 kg., 14.8 ibs.
Remote control transmitter RC-148S/RC-144S
Transmitter:
Signal range:
Power supply:
Infrared
Approx. 5 meters (16ft. 4”)
Two “AA” batteries (1.5V x 2)
TX-800
35 watts per channel, min. RMS, at 8 ohms, both
channels driven, from 40Hz to 20kHz, with no more
than 0.3% THD.
2 x 85 watts at 4 ohms, 1kHz (DIN)
2 x 65 watts at 8 ohms, 1kHz (DIN)
2 x 45 watts at 4 ohms, 1kHz (DIN)
2 x 40 watts at 8 ohms, 1kHz (DIN)
0.3% at rated power
0.1% at 25 watt output
0.3% at rated power
0.1% at 25 watt ouput
35 at 8 ohms
20 - 30,000 Hz + 1dB
20 — 20,000 Hz + 0.8dB
Phono: 2.5mV/50 kohms
CD/Tape Play: 150mV/50 kohms
Tape Rec: 150mV/3.5 kohms
120mV RMS at 1kHz, 0.3% THD
Phono: 85dB (at 10mV input, A weighted}
75dB (IHF A-202)
CD/Tape: 95dB (A weighted)
80dB (IHF A-202)
Bass: + 10dB at 100Hz
Treble: + 10dB at 10kHz
87.5 - 108.0MHz (50kHz steps)
Mono: 12.4dBf, 1.2uV, 75 ohms
1.2nV (S/N 26dB, 40kHz Devi.)
75 ohms DIN
Stereo: 19.2dBf, 2.5uV, 75 ohms
25uV(S/N 46dB, 40kHz Devi.)
75 ohms DIN
Mono: 18.2dBf, 2.2uV, 75 ohms
Stereo: 38.2dBf, 22V, 75 ohms
1.5dB
85dB
90dB
Mono: 70dB
Stereo: 65dB8
50dB DIN (+300kHz, 40kHz dev.)
50dB
Mono: 0.15%
Stereo: 0.30%
30 — 15,000Hz + 1.5dB
40dB at 1kHz
30dB at 100 - 10,000Hz
522 ~ 1611kHz (9kHz steps)
30LV
40dB
40dB
40dB
0.8%
European models: AC220V, 50Hz
Canadian models: ACi120V, 60Hz
U.K& Australian models: AC 240V, 50Hz
Worldwide models: 120 and 220V switchable, 5(//G0Hz
435 x 115 x 320 mm
17-1/8" x 4-1/2" x 12-9/16"
5.7 kg., 12.6 Ibs.
Specifications and features are subject to change Witio alt notice.