Need help?Do you have a question about the Onkyo TX-870 and is the answer not in the manual?
Connects speakers to the unit's terminals and outlines proper polarity and cable usage.
Details how to connect Onkyo components with RI mark for remote control operation.
Explains connecting a turntable to the PHONO input jacks and the importance of ground connection.
Connects CD players and other audio components to CD jacks for playback and remote control.
Guides connecting tape decks and graphic equalizers to TAPE-1 and TAPE-2 jacks.
Connects video disc players and VCRs to VCR-1/VDP and VCR-2 jacks for audio/video playback.
Details connecting VCRs to VCR-2 jacks for recording video and audio signals.
Connects the unit's MONITOR OUT to a TV for displaying video signals.
Explains connecting external power amplifiers or pre-amplifiers to the unit's jacks.
Describes the unit's standby state and how system power is controlled.
Guides on tuning FM/AM radio stations, including auto and manual tuning methods.
Explains how to store and recall up to 20 FM/AM stations in memory.
Instructions for playing records using the PHONO input.
How to play CDs using the CD or CD DIRECT input selector.
Steps for playing audio from connected tape decks.
Guides on recording audio sources to tape decks connected to TAPE-1 and TAPE-2.
Instructions for copying audio from one tape deck to another.
How to connect and use a graphic equalizer with the unit.
Playing audio and video from a disc player connected to VCR-1/VDP.
Playing audio and video from a VCR connected to VCR-2.
Procedure for recording video disc programs onto a VCR-2.
Recording TV broadcasts or other sources onto a VCR-2.
Information on the type of batteries needed and proper insertion for the remote control.
Important notes on using the remote control, including environmental factors and interference.
Procedure and recommendations for replacing the remote control transmitter batteries.
To Next Page
General
