Onkyo TX-NR1007

E n
AV Receiver
TX-NR1007
Instruction Manual
Thank you for purchasing an Onkyo AV Receiver.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new AV Receiver.
Please retain this manual for future reference.
Contents
Introduction ...................................2
Connection ..................................18
Turning On & First Time Setup .....43
Basic Operations.........................62
Using the Listening Modes ........76
Advanced Setup ..........................87
NET ............................................115
Multi Zone ................................123
Controlling Other Components ....132
Others.........................................147

Onkyo TX-NR1007 Specifications

General

Impedance	4 Ω
Audio output channels	9.2 channels
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	0.05 %
HDMI	Yes
Package depth	591 mm
Package width	576 mm
Package height	337 mm
Dimensions (WxDxH)	435 x 198 x 463 mm
Power requirements	AC 220-240 V, 50/60 Hz
Output power description	180 W/Ch
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Product color	Silver
Package weight	28800 g
Power consumption (typical)	1060 W

Weight and Dimensions

Weight	23500 g

Summary

Important Safety Instructions

Supplied Accessories

Front & Rear Panels

Front Panel

Overview of AV receiver front panel controls and indicators.

Remote Controller

Installing the Batteries

Instructions for inserting batteries into the remote control.

Aiming the Remote Controller

Guidance on pointing the remote at the AV receiver's sensor.

Connecting Antenna

Connecting the Indoor FM Antenna

Instructions for connecting the supplied indoor FM antenna.

About HDMI

Connecting a TV or Projector

Turning On the AV receiver

Turning On and Standby

Steps to power on the AV receiver and put it into standby mode.

First Time Setup

Monitor Setup

Configuring video output settings for connected displays and sources.

First Time Setup (Continued)

Using the Onscreen Setup Menus

Navigating and making settings using the AV receiver's onscreen menus.

First Time Setup (Continued)

HDMI Input Setup

Assigning HDMI inputs to specific input selectors for proper source recognition.

First Time Setup (Continued)

Speaker Settings

Configuring speaker impedance, type, and zone settings for optimal audio.

Audyssey MultEQ XT Room Correction and Speaker Setup

About Audyssey Dynamic EQ

Explains how Dynamic EQ adjusts frequency response and surround levels at any volume.

Basic Operations

Selecting the Input Source

How to choose the AV component for listening or watching.

Basic Operations (Continued)

Adjusting the Bass & Treble

Adjusting low and high frequency sound output for front speakers.

Listening to the Radio

Using the Tuner

Explains how to tune into AM and FM radio stations.

Using the Listening Modes

Selecting Listening Modes

How to choose different sound modes like Stereo, Mono, or THX.

Advanced Setup

Onscreen Setup Menus

Overview of the AV receiver's setup menu structure for configuration.

Advanced Setup (Continued)

Speaker Setup

Configuring speaker connections, distances, and crossover frequencies.

NET

Network Requirements

Details on Ethernet, router, and CAT5 cable needed for network connectivity.

Connecting the AV Receiver

Steps to connect the AV receiver to a home network via Ethernet cable.

Multi Zone

Multiroom Capability

Explains the ability to use three speaker systems (Main, Zone 2, Zone 3) simultaneously.

Multi Zone (Continued)

Using Zone 23

How to turn zones on/off, select sources, and control volume with the remote.

Controlling Other Components

Looking up for Remote Control Code

How to find and select remote control codes from the onscreen setup menu.

Controlling Other Components (Continued)

Entering Remote Control Codes

Step-by-step guide to entering remote control codes for other components.

Controlling Other Components (Continued)

Controlling a TV

How to use the remote controller to operate a connected TV.

Controlling Other Components (Continued)

Controlling a DVD Player or DVD Recorder

How to use the remote controller to operate a DVD player or recorder.

Controlling Other Components (Continued)

Activities Setup

How to program ACTIVITIES buttons for macro commands.

Controlling Other Components (Continued)

Learning Commands

How to teach the remote controller to learn commands from other remotes.

Troubleshooting

Power

Solutions for issues related to powering the AV receiver on or off.

Audio

Solutions for no sound or very quiet audio issues.

Specifications

Amplifier Section

Technical specifications for the AV receiver's amplifier.

Video Section

Technical specifications for the AV receiver's video processing.

Video Resolution Chart