To Next PageTo Next PageWhy is there no sound or very quiet on my Onkyo Receiver?
There might be several reasons for this. Ensure that you have selected the correct input on your Onkyo Receiver for the device you are using. Also, check that the muting function is not enabled. Another reason could be that not all listening modes utilize all speakers.
What to do if my Onkyo TX-NR1030 Receiver turns off unexpectedly?
Your Onkyo AV receiver might be automatically entering standby mode if the Auto Standby feature is enabled and has been activated.
What to do if the remote controller does not work for Onkyo TX-NR1030 Receiver?
Before using the remote controller, make sure to press the RECEIVER button first to control the unit.
Why can't I access the network on my Onkyo Receiver?
Try unplugging and then plugging back in the unit or the wireless LAN router, and check that they are powered on. If your wireless LAN router isn't showing up on the access point list, it might be set to hide the SSID, or the ANY connection might be disabled. Adjust these settings and try again.
What to do if there is no sound for multi-zone function on Onkyo Receiver?
If you're using a CD player or similar device without an HDMI output, connect it to the analog audio input jacks on the unit. Multi-zone output is not possible with only a digital optical or coaxial cable connection. If using an analog connection, you may need to adjust the analog audio output settings on the player.
How to troubleshoot Bluetooth connection issues with Onkyo TX-NR1030?
Try unplugging and then plugging back in both the unit and the Bluetooth-enabled player. After doing so, confirm that Bluetooth is enabled on the Bluetooth device and that a connection with the unit has been successfully established.
What to do if there is no picture on my Onkyo TX-NR1030 Receiver?
First, make sure the correct input selector button has been chosen. Also, if the listening mode is set to Pure Audio, video output will be disabled. To display video while the unit is in standby, ensure the HDMI Through function is enabled. Keep the TV antenna cable separated from the unit's cables to prevent interference. If you are using a player that supports HDCP2.2, connect it to the HDMI IN3 jack and the TV to the HDMI OUT MAIN jack.
How to fix HDMI control not functioning correctly on Onkyo TX-NR1030?
Ensure that the CEC link function is enabled on your Onkyo unit. Additionally, verify that the HDMI linked system setting is properly configured on your TV.
General| Receiver type | Surround |
|---|---|
| Frequency range | 5 - 100000 Hz |
| Output impedance | 470 Ω |
| Input sensitivity | 200 mV |
| Pre-out connectivity | Yes |
| Audio output channels | 9.2 channels |
| Signal-to-Noise Ratio (SNR) | 110 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Dynamic power per channel (3 Ohm) | 300 W |
| Dynamic power per channel (4 Ohm) | 250 W |
| Dynamic power per channel (8 Ohm) | 150 W |
| Power output per channel (1KHz@6 Ohm) | 185 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| HDMI in | 8 |
| Remote (IR) input | 1 |
| Composite video in | 4 |
| Digital audio optical in | 3 |
| Component video (YPbPr/YCbCr) in | 2 |
| Multichannel audio output type | RCA |
| Audio formats supported | AAC, FLAC, LPCM, MP3, OGG, WAV, WMA |
| Bluetooth version | 2.1+EDR |
| Bluetooth profiles | A2DP, AVRCP |
| RDS features | PS, PTY, RT, TP |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Internet radio services supported | Pandora, Spotify, TuneIn |
| Optical drive included | No |
| Display | - |
| Product color | Silver |
| Audio decoders | Dolby TrueHD, DTS Neo:X, DTS-HD, DTS-HD Master Audio |
| Damping factor | 60 |
| Center speaker impedance | 4 Ω |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.12 W |
| Power consumption (typical) | 955 W |
| THX-certified | THX Select2 Plus |
| Package weight | 25000 g |
| Package depth | 594 mm |
| Package width | 602 mm |
| Package height | 337 mm |
Weight and Dimensions| Depth | 466.5 mm |
|---|---|
| Width | 435 mm |
| Height | 199 mm |
| Weight | 20500 g |
Instructions for tuning stations automatically, manually, or by frequency.
Step-by-step guide to playing music files from a USB storage device.
Instructions for subscribing to and using SiriusXM Internet Radio service.
Guide to setting up and using the Slacker Personal Radio service.
Details about the TuneIn internet radio service and how to use it.
Guide to setting up and using the Pandora internet radio service.
How to use Windows Media Player 12 for remote playback of music files.
Steps to configure Windows Media Player 11 or 12 for DLNA media sharing.
How to play music files from a DLNA server using the unit.
Steps to select and play music files from a shared folder.
Steps to configure sharing options and create a shared folder on a PC.
Detailed steps for creating a folder to share on a PC.
How to play music files from a shared folder on the network.
Identifies and explains the functions of various remote control buttons.
How to select the best sound mode for your input source.
Details the Pure Audio mode for purer sound.
Explains the Pure Analog Playback function for cleaner sound.
Allows configuration of advanced settings like input remapping and speaker settings.
Configures the HDMI output jacks for video signal conversion and resolution matching.
Allows changing assignment of input selector buttons and HDMI IN jacks.
Allows changing assignment of input selector buttons and COMPOSITE VIDEO IN jacks.
Change speaker configuration, impedance, and connection types.
Set the distance from each speaker to the listening position.
Adjust the level of each speaker using the built-in test tone.
Configure THX audio settings like speaker spacing and subwoofer.
Set an easy name for each input, shown on the main unit display.
Select appropriate image quality setting for cinema or game.
Set listening mode for Dolby Digital, Plus, and TrueHD signals.
Enable input selection link and other link functions with HDMI CEC devices.
Display HDMI connected player video on TV even when unit is in standby.
Update the firmware using a USB storage device.
Allows changing assignment of input selector buttons to COMPONENT VIDEO IN jacks.
Allows changing assignment of input selector buttons and digital audio jacks.
Adjust the speaker level using the built-in test tone.
Configure various sound settings like multiplex audio and sound field.
Adjust image quality when video player is connected to HDMI OUT MAIN jack.
Change setting suitable for game, correct video signal delay.
Set listening mode for DTS and DTS-HD signals.
Make initial setup configurations from the setup menu.
Select the type of front speaker connection (Normal or Bi-Amp).
Set the SW PRE OUT jacks for audio output signals.
Adjust the speaker level using the built-in test tone.
Adjust volume, rename inputs, and adjust image quality.
Adjust the output resolution of the HDMI OUT jacks.
Make the audio input setting for each input selector.
Adjust the speaker level using the built-in test tone.
Adjust the subwoofer level using the built-in test tone.
Enable/disable sound field set in automatic speaker setup.
Update the firmware via network.
Input and register remote control codes for other devices.
How to program remote control codes to REMOTE MODE buttons to operate other devices.
How to operate CEC-compatible components via HDMI linked operation.
How to assign a sequence of operations to an ACTIVITIES button.
How to search for remote control codes and register them in the Setup menu.
How to perform multi-step operations by pressing a single button.
How to connect speakers supporting bi-amping.
Connect external amplifiers for 11.4 ch playback.
How to use and connect dipole speakers for surround sound.
How to connect a power amplifier to use the unit as a pre-amplifier.
Explains the RI (Remote Interactive) function for connecting Onkyo components.
Operate and play music/videos from iPod/iPhone via RI Dock.
How to connect and set up RI components using RI and RCA cables.
How to program RI remote control codes for operating components.
Step-by-step guide to update the firmware using a USB storage device.
Step-by-step guide to update the firmware using a network connection.
Steps to initiate the firmware update process via USB.
Procedures to reset the unit and remote controller to default settings.
Troubleshooting picture problems with HDMI IN connections.
Troubleshooting steps for no sound or low volume issues.
Troubleshooting steps if the remote controller is not functioning.
Troubleshooting steps when there is no picture displayed.
Steps to verify if HDMI linked operation settings are enabled correctly.
