Need help?Do you have a question about the Onkyo TX-NR1030 and is the answer not in the manual?
General| Receiver type | Surround |
|---|---|
| Frequency range | 5 - 100000 Hz |
| Output impedance | 470 Ω |
| Input sensitivity | 200 mV |
| Pre-out connectivity | Yes |
| Audio output channels | 9.2 channels |
| Signal-to-Noise Ratio (SNR) | 110 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Dynamic power per channel (3 Ohm) | 300 W |
| Dynamic power per channel (4 Ohm) | 250 W |
| Dynamic power per channel (8 Ohm) | 150 W |
| Power output per channel (1KHz@6 Ohm) | 185 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| HDMI in | 8 |
| Remote (IR) input | 1 |
| Composite video in | 4 |
| Digital audio optical in | 3 |
| Component video (YPbPr/YCbCr) in | 2 |
| Multichannel audio output type | RCA |
| Audio formats supported | AAC, FLAC, LPCM, MP3, OGG, WAV, WMA |
| Bluetooth version | 2.1+EDR |
| Bluetooth profiles | A2DP, AVRCP |
| RDS features | PS, PTY, RT, TP |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Internet radio services supported | Pandora, Spotify, TuneIn |
| Optical drive included | No |
| Display | - |
| Product color | Silver |
| Audio decoders | Dolby TrueHD, DTS Neo:X, DTS-HD, DTS-HD Master Audio |
| Damping factor | 60 |
| Center speaker impedance | 4 Ω |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.12 W |
| Power consumption (typical) | 955 W |
| THX-certified | THX Select2 Plus |
| Package weight | 25000 g |
| Package depth | 594 mm |
| Package width | 602 mm |
| Package height | 337 mm |
Weight and Dimensions| Depth | 466.5 mm |
|---|---|
| Width | 435 mm |
| Height | 199 mm |
| Weight | 20500 g |
To Next Page
