Onkyo TX-NR1007 - Page 103

103
Advanced Setup—Continued
Brightness
*1
–50 to +50 (default: 0)
With this setting you can adjust the picture brightness. “–50” is the darkest. “+50” is the brightest.
Contrast
*1
–50 to +50 (default: 0)
With this setting you can adjust contrast. “–50” is the least. “+50” is the greatest.
Hue
*1
–20 to +20 (default: 0)
With this setting you can adjust the red/green balance. “–20” is the strongest green. “+20” is the strongest red.
Saturation
*1
–50 to +50 (default: 0)
With this setting you can adjust saturation. “–50” is the weakest color. “+50” is the strongest color.
Gamma
*1
–3 to +3 (default: 0)
Adjust the balance of incoming picture R (red), G (green), and B (blue) color data signal to the output color
data signal.
Red Brightness
*1
–50 to +50 (default: 0)
With this setting you can adjust the picture red brightness. “–50” is the darkest. “+50” is the brightest.
Red Contrast
*1
–50 to +50 (default: 0)
With this setting you can adjust red contrast. “–50” is the least. “+50” is the greatest.
Green Brightness
*1
–50 to +50 (default: 0)
With this setting you can adjust the picture green brightness. “–50” is the darkest. “+50” is the brightest.
Green Contrast
*1
–50 to +50 (default: 0)
With this setting you can adjust green contrast. “–50” is the least. “+50” is the greatest.
Blue Brightness
*1
–50 to +50 (default: 0)
With this setting you can adjust the picture blue brightness. “–50” is the darkest. “+50” is the brightest.
Blue Contrast
*1
–50 to +50 (default: 0)
With this setting you can adjust blue contrast. “–50” is the least. “+50” is the greatest.
Note:
*1 When the “ISF Mode” setting is set to “Day” or “Night”, this setting cannot be selected.