89
Advanced Setup—Continued
Component Video Input
See “Component Video Input Setup” on page 50.
Digital Audio Input
See “Digital Audio Input Setup” on page 51.
Analog Audio Input
Multich See “Analog Audio Input Setup” on page 52.
Subwoofer Input Sensitivity
0 dB (default), 5 dB, 10 dB, 15 dB
Some DVD players output the LFE channel from their analog subwoofer output at 15 dB higher than normal.
With this setting, you can change the AV receiver’s subwoofer sensitivity to match your DVD player. Note that
this setting only affects signals connected to the AV receiver’s MULTI CH: SUBWOOFER jack.
If you find that your subwoofer is too loud, try the 10 dB or 15 dB setting.
To Next Page
Loading...
