TX-NR1010/3010/5010/ DTR-70.4
OPERATION CHECK-4
2.TEST MODE(1/4)
2-1.TEST MODE FOR MODEL, DESTINATION AND FL DISPLAY
NOTE: If VOL value is not 30 (-52dB) (initial setting), test mode cannot be set.
a. Push ON/STANDBY key while pushing down TV/CD button button to display "TEST-".
b. Then push DIMMER key or RT/PTY/TP key and get the FL test mode.
c. In the FL test mode, TONE - button is FL TEST DOWN and TONE + button is FL TEST UP.
d. REC OUT and ZONE2 button's originally operation can't work when it is in FL test mode.
e. The contents of the step are as follows.
1. Lit all segment
2. Lit upper 'EDCBA987654321', lower '23456789ABCDEF'.
3. Lit a even number segment
4. Lit an odd number segment
5. The Destination is displayed. Please see the below for detail.
f. To close the FL test, push POWER button.
N R 1 0 1 0 D 2 0 0 0
MODEL Name Destination
A B
C
D
NR1010 : TX-NR1010
NR3010 : TX-NR3010
NR5010 : TX-NR5010
DTR704 : DTR-70.4
A:Value of AD port of BAND
B:Value of AD port of INIT1
C:Value of AD port of INIT2
D:Value of AD port of INIT3
MODEL Name TX-NR1010 TX-NR3010
Destination DC MP
MR
JJ DC
MA
JJ
MB
MP
MQ
MR
ABCD 2000 8000 4000 2400 8400 4800
TX-NR5010 DTR-70.4
DC MP DD MA
MR
2800 8800 2460 8460
US : USA
-- : JAPAN
WR : OTHER
2-2. TEST MODE FOR OPERATION
a. Push STANDBY/ON button while pushing down TV/CD button to display "TEST-_".
b. Next, if the following keys are pushed, it becomes a each TEST MODE.
c. In the test mode, (TONE)- button is TEST MODE DOWN and (TONE)+ button is TEST MODE UP.
d. "TEST 1-00" are used to check a protection circuit, and the relay recovered in one second.
1-00 2-00 3-00 4-00 5-00 6-00
KEY TEST
FIRMWARE
VERSION
BD/DVD CBL/SAT STB/DVR
GAME
GAME1
TUNER TV/CD
MEMORY
(Re-EQ)
TONE
IDLING
TIMER
FL TEST
TUNING MODE
(LATE NIGHT)
DIMMER
(RT/PTY/TP)
TEST MODE
FIRMWARE
COMBINATION CHECK
ENTER
When the MPU version
is displayed, push
"MEMORY(Re-EQ)"
CHECK SUM
TEST MODE
Button --->
Test No. --->
4460
JJ
To Next Page
Loading...
