Onkyo TX-NR3010

E n
AV RECEIVER
TX-NR5010
TX-NR3010
Instruction Manual
Contents
Safety Information and Introduction ............2
Table of Contents...........................................6
Connections .................................................13
Turning On & Basic Operations..................26
Advanced Operations ..................................57
Controlling Other Components...................92
Appendix.....................................................101
Internet Radio Guide
Remote Control Codes

Onkyo TX-NR3010 Specifications

General

Impedance	75 Ω
Frequency range	5 - 100000 Hz
Output impedance	470 Ω
Input sensitivity	200 mV
Audio output channels	9.2 channels
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	0.05 %
Dynamic power per channel (3 Ohm)	320 W
Dynamic power per channel (4 Ohm)	270 W
Dynamic power per channel (8 Ohm)	160 W
Power output per channel (1KHz@6 Ohm)	200 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	9
Line-in	Yes
Audio (L/R) in	7
Remote (IR) input	1
Composite video in	5
Digital audio optical in	3
Multichannel audio input type	RCA
Component video (YPbPr/YCbCr) in	2
Connectivity technology	Wired
Audio formats supported	AAC, FLAC, LPCM, MP3, OGG, WAV, WMA
Wi-Fi	No
RDS features	PS, PTY, RT, TP
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Preset stations quantity	40
Display	-
Product color	Silver
Audio decoders	Dolby Pro Logic IIz, DTS Neo:6
Apple docking compatibility	iPhone, iPod
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.15 W
Power consumption (typical)	1010 W
Package weight	29000 g
Package depth	594 mm
Package width	610 mm
Package height	337 mm

Weight and Dimensions

Depth	463.5 mm
Width	435 mm
Height	198.5 mm
Weight	25000 g