To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-NR808 and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| Amplifier Type | Discrete |
| HDMI Inputs | 6 |
| HDMI Outputs | 2 |
| Network Capability | Yes |
| THX Certified | Yes |
| Input Sensitivity and Impedance | 200 mV/47 kOhms |
| Bluetooth | No |
| USB Port | Yes (Front) |
| Power Output | 135 W per channel (8 ohms) |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus |
| Weight | 39.7 lbs |
| Audyssey | Audyssey MultEQ XT |
| Network Features | Internet radio, streaming services |
| Video Processing | Faroudja DCDi Cinema |
| THD | 0.08% |
| Frequency Response | 5Hz-100kHz |
| Video Inputs/Outputs | Composite |
| Audio Inputs/Outputs | Analog |
Specific FCC information and warnings for US models of the AV receiver.
Canadian compliance information and warnings for the AV receiver.
Identification and explanation of controls and indicators on the AV receiver's front panel.
Explanation of indicators and information shown on the AV receiver's display.
Identification and explanation of input and output jacks on the AV receiver's rear panel.
Guide to using the remote controller for basic AV receiver operations and functions.
Guidance on speaker placement and setup for optimal surround sound experience.
Instructions for connecting the AV receiver to power and other components.
Detailed steps for connecting speaker systems to the AV receiver.
Procedure for connecting an external amplifier for enhanced audio output.
Explanation of different video and audio cable types and their connections.
Guide to connecting external devices using HDMI for digital audio and video.
Instructions for connecting various AV components to the receiver's inputs.
Steps for connecting and utilizing Onkyo components via RI for system control.
Procedure for connecting FM and AM antennas for radio reception.
Instructions for safely connecting the AV receiver's power cord.
Guidance on choosing the best connection formats for optimal AV performance.
Steps for powering the AV receiver on, off, and into standby mode.
Overview of fundamental operations like selecting sources and adjusting volume.
Procedure for automatic room acoustics calibration and speaker setup.
Instructions for tuning into AM and FM radio stations using the built-in tuner.
Explanation of the Radio Data System and its information display capabilities.
How to view text information broadcast by RDS-enabled radio stations.
How to connect external recording devices like VCRs or CD recorders.
Procedure for recording audio and video from different sources simultaneously.
Guide to choosing and activating various sound listening modes.
Overview of the AV receiver's on-screen setup menu structure.
General steps for navigating and making selections within the setup menus.
Checking and manually adjusting speaker configurations.
Setting speaker impedance for optimal amplifier performance.
Configuring front speaker connection type (Normal or Bi-Amp).
Selecting audio channels or output for multiplex and mono sources.
Adjusting Dolby Pro Logic IIx settings like Panorama, Dimension, and Height Gain.
Configuring DTS Neo:6 settings for surround sound playback.
Enabling Audyssey settings like Dynamic EQ after calibration.
Adjusting equalization for consistent sound quality at varying volume levels.
Enabling Game Mode to reduce video signal delay, potentially affecting picture quality.
Setting the aspect ratio for video display.
Adjusting picture settings like Film Mode and Brightness for optimal display.
Selecting film mode processing for movie playback.
Adjusting picture sharpness for clearer edges.
Specifying default listening modes for analog and PCM audio signals.
Setting default listening modes for mono digital audio sources.
Setting default listening modes for 2-channel digital audio sources.
Setting default listening modes for Dolby Digital, Plus, and TrueHD audio.
Configuring volume display, muting level, maximum volume, and power-on volume.
Adjusting the audio output level when the muting function is active.
Setting a limit for the maximum volume level.
Controlling the display of operation details on the AV receiver's screen.
Selecting the TV system (NTSC or PAL) for proper menu display.
Adjusting bass and treble for the front speakers.
Adjusting individual speaker output volumes.
Accessing Audyssey Dynamic EQ and Dynamic Volume settings.
Overview of network connectivity for music streaming and internet radio.
Information on necessary network hardware and setup for connectivity.
Steps to connect the AV receiver to a home network via Ethernet.
Requirements for accessing internet radio services through the network.
Instructions for accessing and playing stations via the vTuner service.
Guidance on accessing internet radio stations via a web browser.
Requirements for computers and media servers for remote playback.
List of music file formats supported for remote playback.
Steps to set up Windows Media Player 12 for remote playback.
Procedure for playing music files remotely from a media server.
Methods for connecting Zone 2 speakers directly or to an external amp.
Setup for Powered Zone 2 playback with different sources in main and Zone 2 rooms.
Setup for Zone 2 playback via an external amplifier.
Procedure for connecting Zone 3 speakers to an external amplifier.
Setting Zone 2/3 volume control to Fixed or Variable.
Limiting the maximum volume for Zone 2 and Zone 3.
Setting the default volume when Zone 2/3 is turned on.
Turning zones on/off, selecting sources, and adjusting volume for Zone 2/3.
Connecting a multiroom kit to control receiver in Zone 2/3.
Using a multiroom kit for receiver installation inside a cabinet.
Using a multiroom kit to control other components via IR emitter.
Plugging an iPod/iPhone into the AV receiver's USB port for playback.
Steps for playing music, photos, and videos from an iPod/iPhone.
Basic iPod control without on-screen display.
Advanced iPod control with on-screen display of content lists.
Basic operation and features of the UP-A1 Dock for iPod.
General operation procedures for the Onkyo Dock.
Automatic receiver power-on when iPod playback starts.
Automatic source switching when iPod playback begins.
Controlling basic iPod functions using the AV receiver remote.
Important notes regarding iPod compatibility and operation.
Using iPod alarm clock for automatic playback and receiver activation.
Information on charging iPod battery while docked.
Understanding status messages related to the connected iPod dock.
Information on the ND-S1 Digital Media Transport for iPod.
System On, Auto Power On, and Direct Change functions with RI Dock.
Automatic power-on of components when AV receiver is turned on.
Automatic power-on of receiver and iPod upon playback start.
Automatic source switching when iPod playback starts.
Controlling basic iPod functions using the AV receiver remote.
Using iPod alarm clock for automatic playback and receiver activation.
Important notes regarding RI Dock operation and iPod control.
Detailed guide to controlling iPod functions via remote control codes.
List of preprogrammed remote codes for controlling various AV components.
Procedure to search for and enter remote control codes from the setup menu.
Solutions for audio issues like no sound, low volume, or sound only from certain speakers.
Troubleshooting steps for the AV receiver not turning on or flashing STANDBY indicator.
Steps to resolve issues with no video signal on the display.
Troubleshooting no picture issues specifically for HDMI input sources.
Solutions for when the AV receiver's on-screen menus are not displayed.
Troubleshooting steps for distorted video picture quality.
Tips to improve radio reception and FM stereo indicator issues.
Troubleshooting steps for a non-functional remote controller.
Solutions for issues when the remote cannot control other AV components.
Technical specifications for the AV receiver's amplifier performance.
Technical specifications for the AV receiver's FM and AM tuner.
General specifications including power supply, dimensions, and weight.
HDMI interface specifications, including supported formats and resolutions.
List of supported video input types and their specifications.
Specifications for the AV receiver's analog and digital audio outputs.
List of components compatible with RIHD for HDMI system control.
Description of linked operations possible with RIHD-compatible devices.
