To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-NR3030(B) and is the answer not in the manual?
General| Channels | 9.2 |
|---|---|
| HDMI Inputs | 8 |
| 4K Passthrough | Yes |
| Dolby Atmos | Yes |
| DTS:X | Yes |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| AirPlay | Yes |
| Internet Radio | Yes |
| Phono Input | Yes |
| THD | 0.08% |
| Frequency Response | 5 Hz - 100 kHz |
| Analog Inputs | 6 |
| Pre-out Channels | 11.2 |
| Subwoofer Outputs | 2 |
| Room Correction | AccuEQ |
| THX Certified | Yes |
| HDMI Outputs | 2 |
| Digital Inputs | 2 Coaxial |
| Zone Outputs | 2 |
| Network Features | Spotify Connect |
| Supported Audio Formats | DSD, FLAC, ALAC, WAV, MP3, WMA, AAC |
| Video Features | 4K/60p |
Lists power supply requirements for black and silver models.
Highlights critical components for safety and specific replacement procedures.
Details the button sequence to access the audio debug mode.
Explains microprocessor, DSP versions, and audio debug output.
Lists codes for FL display and defines parameters like muting and input.
Details input formats and sampling frequencies for audio signals.
Covers input format, dialog normalization, and DIRINT values.
Describes the procedure to activate HDMI debug mode.
Illustrates input and output resolution displays.
Details output resolution and status for DVI, VGA, and other signals.
Details HDMI input modes, color depth, and bit settings.
Illustrates input/output resolution and error indicators for PC signals.
Describes the button sequence to enter service information mode.
Explains power off causes, temperature, volume, and listening modes.
Details how to confirm firmware version and main checksum.
Describes procedures to confirm output voltage and thermal sensor readings.
Details how to confirm the model name and destination.
Explains test mode selection and idling timer functions.
Covers checks for voltage detection protectors and update route status.
Details Wi-Fi connection checks and Zone2 DAC route confirmation.
Covers checks for current detection protectors and output sensors.
Details checks for cooling fan, key operations, and network connectivity.
Details checks for FL tube, LEDs, and headphone jack operation.
Covers confirmation of FM radio, RDS, OSD, and CEC operations.
Details confirmation of video signal detection and in/out paths.
Explains how to confirm the FL display segments and indicators.
Covers tests for muting time reduction and firmware update routes.
Details Wi-Fi connection checks and confirmation of key operations.
Details tests for DSP output, speaker relay, and 12V triggers.
Details settings for FM radio operation and video input signals.
Illustrates cooling fan circuit, thermal sensor, and operating conditions.
Covers pre-adjustment of registers and heat running for aging.
Locates check points for idling current adjustment.
Details steps for downloading, unzipping, and copying firmware.
Details the steps to perform the firmware update via USB.
Provides an exploded view of the main unit assembly.
Illustrates the layout of components on the front panel.
Details components of the front bracket, including fan and transformer.
Illustrates the components within the amplifier section.
Shows components on the rear panel, including wireless modules.
Provides FCC and Industry Canada compliance information.
Illustrates audio signal flow from inputs to outputs.
Details headphone amplifier and speaker terminal connections.
Illustrates the signal path for analog video inputs and outputs.
Shows circuitry for HDMI input signal processing.
Details circuits for digital audio inputs and outputs.
Illustrates circuitry for various analog and digital audio paths.
Provides further details on analog audio circuit components.
Details the circuit for the left audio channel amplification.
Illustrates amplifier circuits for left and right channels.
Shows final stage amplifier circuits for specific channels.
Illustrates final stage amplifier circuits for R, SR, and C channels.
Details circuits responsible for unit protection.
Illustrates circuits for thermal sensors and cooling fan control.
Details HDMI input connections and Zone2 output routing.
Shows the main power supply circuits and components.
Illustrates signal path for analog video inputs.
Illustrates logic implemented by the Complex Programmable Logic Device.
Illustrates Video Processing Unit circuitry and its connections.
Shows interface between 1st DSP and memory.
Details interface between 2nd DSP and memory.
Shows input signals and processing logic for the 2nd DSP.
Illustrates circuits for digital audio inputs like HDMI, Optical, Coaxial.
Details circuitry for various HDMI inputs.
Shows connections for HDMI input 2 signals.
Illustrates the main HDMI decoder IC and its associated components.
Shows detailed circuitry of the HDMI video processor.
Illustrates logic implemented by the Complex Programmable Logic Device.
Illustrates Video Processing Unit circuitry and its connections.
Shows interface between 1st DSP and memory.
Details interface between 2nd DSP and memory.
Shows input signals and processing logic for the 2nd DSP.
Illustrates HDMI output splitting and signal routing circuits.
Illustrates the main HDMI decoder IC and its associated components.
Details interface between 2nd DSP and memory.
Illustrates interface between 1st DSP and memory.
Shows the integrated circuit and connections for the front panel display.
Illustrates circuitry for button inputs on the front panel.
Shows circuitry for the front panel HDMI input.
Illustrates circuitry for various analog and digital audio paths.
Lists semiconductor components like transistors and diodes with part numbers.
Lists parts for the tuner unit and power supply board.
Lists parts related to Wi-Fi, Bluetooth, and antennas.
Lists items used for packing the unit, like tape and sheets.
Lists semiconductor components for the BAAF-1600 board.
Lists components for boards U002 and U003.
Lists components for boards U006 and U007.
Lists semiconductor parts for the BAPRC-1632 board.
Lists various chip resistors for the BAPRC-1632 board.
Lists components for boards U001 through U003.
Lists components for boards U009, U010, and U012.
