Onkyo TX-NR3030(B)

TX-NR1030/3030/ PR-SC5530/ DTR-60.6/70.6/ DHC-80.6
OPERATION CHECK-6
CONFIRMATION OF VIDEO SIGNAL-DETECTION
2. Confirm the following indicator lights up on the FL TUBE when the following video signal is input.
3. Furthermore, confirm the following indicator is turned off on the FL TUBE when the following video signal isn't input at the
following test mode as well.
Input terminal
Indicator
(1) (2)
Composite
FM STEREO
Component
RDS
1-2. [TV/CD] + [ON/STANDBY] → [PC]
1-1. set the volume level to 25(TX-NR636, DTR-30.6) or 30(TX-NR737, 838, DTR-40, 50.5).
1. Do the following operation.
to the following test mode.
TEST 5-01
1-3. [TONE +]
Confirm Video output signal as shown Table 2, while Video signal are input as shown Table 1 in "Video in_out" sheet.
Table-1
Table-2
<NOTE>Confirm the HDMI path at 1080p signal.
CONFIRMATION OF VIDEO IN/OUT
CONFIRMATION OF FL DISPLAY
The contents of the step
are as follows.
1. Lit all segment and LED
2. Lit '23456789ABCDEF' and LED.
3. Lit a even number segment
and LED.
4. Lit an odd
number segment and LED.
5. The Destination setting is displaye
d and LED..
1-2. [TV/CD] + [ON/STANDBY] → [DIMMER(RT/PTY/TP)]
1-1. set the volume level to 30
1. Do the following operation.
to the FL test mode
[TONE-] = Step down
[TONE+] = Step up
Component HDMI
BD/DVD --- IN1 E IN1 G
CBL/SAT A IN2 F IN2 H
STB/DVR B --- --- IN3 I
GAME C --- --- IN4 J
--- --- --- --- IN5 K
--- --- --- --- IN6 L
--- --- --- --- IN7 ---
AUX D --- --- AUX M
Video Signal -> Composite Video
Output
Test mode
Zone2 out
MONITOR
OUT
5-00(BD/DVD) --- ---
5-01(CBL/SAT) A A
5-02(STB/DVR) *B B
5-03(GAME) *C C
5-04(PC) --- ---
5-05(IN6) --- ---
5-06(IN7) --- ---
5-07(AUX) *D D
5-08(BD/DVD) --- ---
5-09(CBL/SAT) *A *A
OUT Main/Sub/Zone2OUT
EG
FH
Composite Video Component HDMI
--- K
--- L
--- I
--- J
*E E
*F A
--- ---
--- ---