Onkyo TX-NR656 Firmware Update

Firmware Update Onkyo TX-NR656, TX-
NR757, TX-RZ610, TX-RZ710, TX-RZ810 &
HT-R695 (HT-S7800)
(1-29-2018)
We are pleased to offer this firmware update for the best possible
performance of your Onkyo AV Receiver.
This update MUST be installed via USB.
TX-NR656, TX-NR757, TX-RZ610, TX-RZ710, TX-RZ810 & HT-R695
(Current Version 2109-4040-7080-0008)
The 1/29/2018 update will address the following, and includes
previous updates:
1. Adds support for external audio inputs for "FlareConnect".
*For detail about external audio inputs by model, please refer to:
http://www.onkyo.com/flareconnect/
2. Minor bug fixes and improvements stability.
Previous Updates (latest firmware includes all previous)
The 12-18-2017 update will address the following:
1. Adds support for pass-through function of Dolby Vision signal.
*Set the HDMI OUT to “MAIN” to get the Dolby Vision pass-through
(EXCEPT TX-NR555). Dolby Vision will not be available if the HDMI
OUT is set to “MAIN +SUB”.
The 11-2-2017 update will address the following:
1. Adds support for new multi-room audio playback function
"FlareConnect".
*All audio devices in group and "Onkyo Controller" App is required to
update to the latest version.
• Setup Guide: www.intl.onkyo.com/next_generation/setup.html

Onkyo TX-NR656 Specifications

General

Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	7.2 channels
Signal-to-Noise Ratio (SNR)	106 dB
Dynamic power per channel (3 Ohm)	240 W
Dynamic power per channel (4 Ohm)	210 W
Dynamic power per channel (8 Ohm)	120 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	8
Line-in	Yes
PC in (D-Sub)	No
Digital audio coaxial in	1
Component video (YPbPr/YCbCr) in	2
Connectivity technology	Wired & Wireless
Speakers connectivity type	RCA
Bluetooth version	2.1+EDR
Bluetooth profiles	A2DP, AVRCP
AM band range	522 - 1710 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Preset stations quantity	40
Internet radio services supported	Pandora, Spotify, TuneIn
Display	-
Product color	Black
Audio decoders	DTS, DTS-HD Master Audio, Dolby TrueHD
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.15 W
Power consumption (typical)	570 W
Package weight	13000 g

Weight and Dimensions

Depth	378 mm
Width	435 mm
Height	173.5 mm
Weight	10000 g