Onkyo TX-NR709 Firmware Update Guide

1
Firmware Update for the TX-NR709, NR809, NR1009 & HT-RC370
The following outlines the methods to update the firmware via network and via USB storage. Please choose
either one that suits your condition. Before you start, carefully read the update procedu re. It will take about 60
minutes to update the firmware.
Update via network (➔ page 3)
You need a wired Internet connection to update the firmware.
Update via USB storage (➔ page 5)
Please prepare a USB storage device such as a USB flash memory stick. You need at least 32 MB of available
space to update the firmware.
Notes
• Check the network connection before updating.
• Do not touch the any cable or device connected to the AV receiver during the updating process.
• Do not attempt to access the AV receiver from your PC while it is being updated.
• Do not shutdown the power of the AV receiver while it is being updated.
• The storage media in the USB card reader may not work.
• If the USB device is partitioned, each section will be treated as an independent device.
• If the USB device contains a lot of data, the AV receiver may ta ke a while to read it.
• Operation is not guaranteed for all USB devices, which includes the ability to power them.
• Onkyo takes no responsibility whatsoever for the loss or damage of data resulting from the use of a USB device with the AV
receiver. Onkyo recommends that you back up your important music files beforehand.
• If you connect a USB hard disk drive to the USB port, Onkyo recommends that you use its AC adapter to power it.
• USB hubs and USB devices with hub functions are not supported. Do not co nnect your USB device via a USB hub.
• USB devices with security functions are not supported.
Limitation of liability
The program and accompanying online documentation are furnished to you for use at your own risk. Onkyo
will not be liable and you will have no remedy for damages for any claim of any kind whatsoever concerning
your use of the program or the accompanying online documentation, regardless of legal theory, and whether
arising in tort or contract. In no event will Onkyo be liable to you or any third party for any special, indirect,
incidental, or consequential damages of any kind, including, but not limited to, compensation, reimbursement
or damages on account of the loss of present or prospective profits, loss of data, or for any other reason
whatsoever.

Onkyo TX-NR709 Specifications

General

Impedance	16 Ω
Frequency range	5 - 100000 Hz
Output impedance	470 Ω
Input sensitivity	200 mV
Audio output channels	7.2 channels
Signal-to-Noise Ratio (SNR)	106 dB
Total Harmonic Distortion (THD)	0.08 %
Dynamic power per channel (3 Ohm)	250 W
Dynamic power per channel (4 Ohm)	220 W
Dynamic power per channel (8 Ohm)	200 W
Power output per channel (20-20KHz@8 Ohm)	170 W
HDMI in	8
AC (power) in	Yes
Audio (L/R) in	6
Composite video in	1
S-Video inputs quantity	4
Digital audio coaxial in	3
Multichannel audio input type	RCA
Component video (YPbPr/YCbCr) in	2
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, LPCM, MP3, OGG, WAV, WMA
Wi-Fi	No
RDS features	PS, PTY, RT, TP
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Preset stations quantity	40
Internet radio services supported	Last.fm, Napster, vTuner
Display	-
Product color	Black
Audio decoders	Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD
Volume control	Rotary
Apple docking compatibility	iPhone, iPod
AC input voltage	220-240 V
AC input frequency	50 Hz
Power consumption (typical)	570 W
Certification	Windows 7 CE, EMC
THX-certified	THX Select2 Plus
Package weight	16200 g
Package depth	469 mm
Package width	570 mm
Package height	298 mm
Compatible operating systems	Windows 7

Weight and Dimensions

Depth	379 mm
Width	435 mm
Height	174 mm
Weight	12200 g