Do you have a question about the Onkyo TX-NR737 and is the answer not in the manual?
Receiver type | Surround |
---|---|
Frequency range | 5 - 100000 Hz |
Output impedance | 6 Ω |
Input sensitivity | 200 mV |
Audio output channels | 7.2 channels |
Signal-to-Noise Ratio (SNR) | 106 dB |
Total Harmonic Distortion (THD) | 0.8 % |
Dynamic power per channel (3 Ohm) | 250 W |
Dynamic power per channel (4 Ohm) | 220 W |
Dynamic power per channel (8 Ohm) | 130 W |
Power output per channel (20-20KHz@8 Ohm) | 170 W |
HDMI in | 7 |
AC (power) in | Yes |
Audio (L/R) in | 6 |
Composite video in | 3 |
Digital audio coaxial in | 2 |
Digital audio optical in | 1 |
Connectivity technology | Wired |
Speakers connectivity type | - |
Ethernet LAN | No |
Bluetooth version | 2.0+EDR |
RDS features | PS, PTY, RT, TP |
AM band range | 522 - 1610 kHz |
FM band range | 87.5 - 108 MHz |
Supported radio bands | AM, FM |
Preset stations quantity | 40 |
Display | LCD |
Product color | Black |
Audio decoders | Dolby TrueHD, DTS-HD, DTS-HD Master Audio |
Damping factor | 60 |
AC input voltage | 220-240 V |
AC input frequency | 50 - 60 Hz |
Power consumption (standby) | 0.15 W |
Power consumption (typical) | 690 W |
Depth | 379 mm |
---|---|
Width | 570 mm |
Height | 298 mm |
Weight | 11500 g |
Summary of the manual's purpose, covering connections, functions, and playback.
Points to the online advanced manual for more detailed information and updates.
Lists key features of the AV receiver, including Dolby Atmos, THX certification, and connectivity options.
Lists all items included in the package with the AV receiver.
Basic instructions on using the remote control for the AV receiver.
Guides connecting TV and playback devices via HDMI, ARC, and optical/analog audio.
Explains analog and digital audio/video connections for devices lacking HDMI ports.
Details speaker layout and connection for 5.1 and 7.1 channel configurations.
Describes the roles of different speaker types and impedance considerations.
Provides guidance on connecting speaker cables, setting impedance, and using banana plugs.
Recommends placement for height speakers to optimize Dolby Atmos effects.
Covers AM/FM antenna, Network (LAN/Wi-Fi), and Headphones connections.
Basic steps for powering on the AV receiver and entering standby mode.
Explains the guided setup process involving calibration, source connection, and network setup.
Details the initial step of the setup wizard for automatic speaker calibration.
Explains how to verify that input sources are correctly connected.
Guides on programming the remote controller to operate other AV components.
Details the process for checking network connection and configuring Wi-Fi settings.
Final step to complete the setup wizard and save settings.
Guides basic playback operations, including input selection and listening modes.
Identifies remote control buttons and describes their functions.
Describes various sound modes (MOVIE/TV, MUSIC, GAME, THX, PURE AUDIO, Direct).
Covers sound quality adjustment, muting, display brightness, and input format checking.
Explains how to tune into radio stations and register favorite stations.
Details Bluetooth pairing and wireless music playback operations.
Explains accessing advanced settings, network services, and media playback via the HOME menu.
Guides using the Quick Setup menu for common settings like input, audio, and video.
Explains setting up and using multi-zone audio playback for a second room.
Describes various listening modes including Dolby, DTS, THX, and game-specific modes.
How to check the audio format and signal details of the input source.
General instructions for accessing and configuring advanced settings.
Configuration for Monitor Out and HDMI Input assignments.
Covers speaker configuration, impedance, front speaker type, and height speaker setup.
Adjusts audio settings like Loudness Plus, Multiplex/Mono, Dolby, DTS, and Theater-Dimensional.
Guides AccuEQ Room Calibration, IntelliVolume, Name Edit, and Picture Adjust settings.
Allows presetting favorite listening modes for specific input sources.
Covers detailed volume settings and on-screen display (OSD) options.
Covers tuner settings and HDMI configuration options.
Details Bluetooth settings, pairing, and troubleshooting connection issues.
Guides on updating the unit's firmware via network or USB.
Details setting the Remote ID and configuring the remote mode setup.
Explains how to lock or unlock the setup menu to protect settings.
Explains the purpose and use of REMOTE MODE buttons for controlling external devices.
Guides on searching for and registering remote control codes for various devices.
Explains how to find the correct remote control codes for different brands and device types.
Instructions for operating televisions using the programmed remote.
Instructions for operating players and recorders using the programmed remote.
Guides for operating VCRs and PVRs with the remote controller.
Instructions for operating satellite and cable receivers with the remote.
Guides for operating CD players with the remote controller.
Instructions for operating cassette tape decks with the remote controller.
Explains how to operate CEC-compatible components via HDMI linked control.
Explains connections and settings for bi-amping speakers to improve sound quality.
Guides on connecting dipole speakers and proper phase matching for sound imaging.
Explains the RI system and its functions like System On and Remote Controller Operation.
Details RI cable connections, input renaming, and programming remote control codes.
Guides operating iPod/iPhone via RI Dock and the AV receiver's remote controller.
Explains the two methods for updating firmware and provides a disclaimer.
Step-by-step guide for updating the unit's firmware using a network connection.
Step-by-step guide for updating the unit's firmware using a USB storage device.
Troubleshooting common error codes encountered during firmware updates.
General advice and simple steps to resolve issues before advanced troubleshooting.
Instructions on how to reset the AV receiver and remote controller to default settings.
Troubleshooting steps for power-related issues like unit not turning on or turning off.
Troubleshooting steps for issues related to sound, volume, and speaker output.
Troubleshooting steps for video-related issues such as no picture or unstable display.
Troubleshooting steps for issues related to radio reception quality.
Troubleshooting steps for issues with the remote controller's functionality.
Troubleshooting steps when RI component operation via remote is not working.
Troubleshooting for controlling non-RI or third-party components.
Troubleshooting steps for issues with iPod/iPhone connectivity and operation via RI Dock.
Troubleshooting steps for issues related to multi-zone audio playback.
Troubleshooting steps for Wi-Fi connection and network access problems.
Troubleshooting Bluetooth connection, playback, and audio quality issues.
Troubleshooting steps for accessing network servers and USB devices.
Troubleshooting for power consumption, headphone sound, display issues, and RI functions.
Lists compatible TVs, players, recorders, and tuner models as of January 2014.
Guides to verify if HDMI linked operation features are correctly enabled.
Explains the HDMI interface, HDCP, and supported functions like ARC and 4K.
Lists the audio formats supported by the unit for server and USB playback.
Lists supported video resolutions for HDMI output jacks based on input signal types.
Explains the components required for establishing a home network (LAN).
Details requirements for server playback and remote playback functions.
Lists requirements for USB storage devices compatible with the unit.
Details supported audio file formats for network and USB playback, including bitrates.
Warns about potential radio wave interference from other devices.
Explains how radio wave reflections can affect wireless performance.
General precautions regarding electronic devices and safe usage.
Lists remote control codes for various brands of televisions.
Lists remote control codes for video accessories.
Lists remote control codes for CD players.
Lists remote control codes for cassette tape decks.
Lists remote control codes for audio accessories.
Lists remote control codes for receivers.
Lists remote control codes for cable PVR combinations.
Lists remote control codes for IPTV PVR combinations.
Lists remote control codes for PVR devices.
Detailed safety warnings and guidelines for product operation and maintenance.
General precautions regarding electronic devices, usage, and environmental factors.
Regulatory compliance information for users in the United States.
Specific notes and regulatory information for Canadian models.
Lists the software packages covered by GNU GPL/LGPL licenses included in the product.
Legal text of the GNU Lesser General Public License (LGPL) version 2.1.
Defines the warranty coverage period and terms for new and refurbished products.
Lists conditions and situations not covered by the Onkyo warranty.
Instructions on how to obtain warranty service from authorized centers.
Details legal limitations of the warranty, including liability and duration.
Defines the warranty coverage period and terms for products purchased in Canada.
Lists conditions and situations not covered by the Canadian Onkyo warranty.
Instructions for obtaining warranty service for Canadian customers.
Details legal limitations of the warranty for products sold in Canada.