Onkyo TX-NR737

Operating Other Components Using Remote Controller
47
VCR/PVR operation
Press the REMOTE MODE button programmed with
the remote control code for the relevant AV component
to switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Operation may be incorrect or
impossible depending on the product.
1
2
3
4
1
REMOTE MODE
2
SOURCE
3
MUTING
4
CH +/-
58
9
6
7
5
GUIDE
6
/ / / , ENTER
7
SETUP
8
PREV CH
9
RETURN
F
G
H
F
, , , , , ,
G
Number 1 to 9, 0, +10
H
CLR, DISPLAY
Satellite receiver / Cable receiver operation
Press the REMOTE MODE button programmed with
the remote control code for the relevant AV component
to switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Operation may be incorrect or
impossible depending on the product.
1
2
3
4
1
REMOTE MODE
2
SOURCE
3
MUTING
4
CH +/-
5
6
7
8
9
F
5
GUIDE
6
/ / / , ENTER
7
SETUP
8
PREV CH
9
RETURN
F
AUDIO
G
H
I
J
G
, , , , , ,
H
A (Red) B (Green), C (Yellow), D (Blue)
I
Number 1 to 9, 0, +10
J
CLR, DISPLAY