Do you have a question about the Onkyo TX-NR676 and is the answer not in the manual?
Receiver type | Surround |
---|---|
Frequency range | 10 - 100000 Hz |
Output impedance | 470 Ω |
Input sensitivity | 200 mV |
Pre-out connectivity | Yes |
Audio output channels | 7.2 channels |
Signal-to-Noise Ratio (SNR) | 106 dB |
Total Harmonic Distortion (THD) | 0.08 % |
Dynamic power per channel (3 Ohm) | 240 W |
Dynamic power per channel (8 Ohm) | 120 W |
Power output per channel (1KHz@6 Ohm) | 210 W |
Power output per channel (20-20KHz@8 Ohm) | 100 W |
Display | - |
Product color | Black |
Audio decoders | DSD, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby TrueHD |
Damping factor | 54 |
AM band range | 530 - 1710 kHz |
FM band range | 87.5 - 107.9 MHz |
Supported radio bands | AM, FM |
Preset stations quantity | 40 |
Internet radio services supported | Spotify |
AC input voltage | 120 V |
AC input frequency | 60 Hz |
Power consumption (standby) | 0.15 W |
Power consumption (typical) | 580 W |
Package weight | 12500 g |
HDMI in | 7 |
Composite video in | 2 |
USB ports quantity | 1 |
Headphone connectivity | 6.3 mm |
Speakers connectivity type | Banana connector |
Optical drive included | No |
Depth | 378 mm |
---|---|
Width | 435 mm |
Height | 173.5 mm |
Weight | 10000 g |
Provides a general guide for setting up the AV receiver and connecting components.
Guides on positioning speakers for optimal surround sound and connecting them.
Instructions for connecting external devices like TVs, Blu-ray players, and game consoles.
Guides users through essential setup steps using an on-screen wizard.
Automates speaker setup by measuring room acoustics for optimal sound.
Explains how to use internet radio, streaming services, and network audio.
Options for selecting sound modes for different content types.
Explains various digital surround sound and direct listening modes.
Crucial safety warnings and precautions for operating the unit.
Explains the terms, conditions, exclusions, and limitations of the product warranty.