To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-NR575 and is the answer not in the manual?
General| Receiver type | Surround |
|---|---|
| Frequency range | 10 - 100000 Hz |
| Output impedance | 470 Ω |
| Input sensitivity | 200 mV |
| Pre-out connectivity | Yes |
| Audio output channels | 7.2 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Dynamic power per channel (3 Ohm) | 160 W |
| Dynamic power per channel (4 Ohm) | 125 W |
| Dynamic power per channel (8 Ohm) | 85 W |
| Power output per channel (1KHz@6 Ohm) | 170 W |
| Power output per channel (20-20KHz@8 Ohm) | 80 W |
| Display | - |
| Apple docking | No |
| Product color | Black |
| Audio decoders | DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby TrueHD |
| Damping factor | 49 |
| Satellite speaker crossover frequency | 200 Hz |
| AM band range | 530 - 1710 kHz |
| FM band range | 87.5 - 107.9 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Internet radio services supported | Spotify |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| Power consumption (standby) | 0.15 W |
| Power consumption (typical) | 460 W |
| Package weight | 12000 g |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Bluetooth version | 4.1 |
| Bluetooth profiles | A2DP, AVRCP |
| Audio formats supported | AAC, AIFF, DSD, FLAC, MP3, WAV, WMA |
| FM antenna ports quantity | 1 |
| Speakers connectivity type | Binding post |
| Headphone connectivity | 6.3 mm |
| HDMI in | 4 |
| Composite video in | 2 |
Weight and Dimensions| Depth | 378 mm |
|---|---|
| Width | 435 mm |
| Height | 173.5 mm |
| Weight | 9400 g |
Lists all accessories and items included with the AV receiver for initial setup.
Identifies and explains buttons and indicators on the front panel of the AV receiver.
Details all input and output jacks located on the rear panel of the AV receiver.
Describes the buttons and functions of the supplied remote controller for the AV receiver.
Provides detailed diagrams and explanations for setting up various speaker configurations.
Instructions for standard and bi-amping speaker connections to the AV receiver.
Details how to connect external devices like TVs and players via HDMI and other interfaces.
Guides the user through the initial setup process for the AV receiver using an on-screen wizard.
Automatically adjusts speaker levels, crossover frequencies, and distances for optimal room acoustics.
Explains how to play audio from AV components like Blu-ray Disc players.
Details how to wirelessly play music from Bluetooth-enabled devices.
Covers enjoying internet radio, streaming services, and music servers.
Explains how to play music files stored on a USB storage device.
Guides on tuning into AM and FM radio stations, both automatically and manually.
Explains how to enjoy audio in a separate room using ZONE 2 features.
Describes various sound processing modes to optimize audio playback based on content.
