Do you have a question about the Onkyo TX-NR535 and is the answer not in the manual?
Receiver type | Surround |
---|---|
Frequency range | 5 - 100 Hz |
Audio output channels | 5.2 channels |
Signal-to-Noise Ratio (SNR) | 100 dB |
Total Harmonic Distortion (THD) | 0.7 % |
Dynamic power per channel (3 Ohm) | 160 W |
Dynamic power per channel (4 Ohm) | 125 W |
Dynamic power per channel (8 Ohm) | 85 W |
Power output per channel (20-20KHz@8 Ohm) | - W |
HDMI in | 6 |
Composite video in | 4 |
Digital audio coaxial in | 2 |
Component video (YPbPr/YCbCr) in | 1 |
Speakers connectivity type | Banana connector |
Ethernet LAN | Yes |
Bluetooth version | 2.1+EDR |
Bluetooth profiles | A2DP, AVRCP |
FM band range | 87.5 - 108 MHz |
Supported radio bands | AM, FM |
Preset stations quantity | 40 |
Optical drive included | No |
Display | - |
Product color | Silver |
Audio decoders | Dolby TrueHD, DTS-HD Master Audio |
Damping factor | 60 |
Apple docking compatibility | iPhone, iPod |
AC input voltage | 230 V |
AC input frequency | 50 Hz |
Power consumption (standby) | 0.2 W |
Power consumption (typical) | 330 W |
Depth | 329 mm |
---|---|
Width | 435 mm |
Height | 150 mm |
Weight | 8100 g |
How to play stations previously added to "My Favorites".
How to set up and perform DLNA playback.
Steps to play music files from a shared folder.
Details the functions of various buttons on the remote controller.
How to choose the best sound effect for different input sources.
How to change speaker settings like subwoofer and crossover.
How to set speaker distance for optimal sound positioning.
How to adjust speaker levels using built-in test tones.
How to configure sound settings for multiplex audio and sound fields.
How to set up and rename each input selector.
Settings related to HDMI functions like CEC and audio output.
Settings for network connectivity, including Wi-Fi and standby.
Settings for pairing and managing Bluetooth devices.
How the REMOTE MODE button controls other AV components.
Steps to program remote control codes for other devices.
Steps for updating firmware via network.
Steps for updating firmware via USB.
How to reset the unit to its factory default settings.
Troubleshooting steps for various audio-related problems.
Troubleshooting steps for video display and connection issues.
Troubleshooting steps for reception and tuner-related problems.