Need help?Do you have a question about the Onkyo TX-NR535 and is the answer not in the manual?
General| Receiver type | Surround |
|---|---|
| Frequency range | 5 - 100 Hz |
| Audio output channels | 5.2 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.7 % |
| Dynamic power per channel (3 Ohm) | 160 W |
| Dynamic power per channel (4 Ohm) | 125 W |
| Dynamic power per channel (8 Ohm) | 85 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| HDMI in | 6 |
| Composite video in | 4 |
| Digital audio coaxial in | 2 |
| Component video (YPbPr/YCbCr) in | 1 |
| Speakers connectivity type | Banana connector |
| Ethernet LAN | Yes |
| Bluetooth version | 2.1+EDR |
| Bluetooth profiles | A2DP, AVRCP |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Optical drive included | No |
| Display | - |
| Product color | Silver |
| Audio decoders | Dolby TrueHD, DTS-HD Master Audio |
| Damping factor | 60 |
| Apple docking compatibility | iPhone, iPod |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 330 W |
Weight and Dimensions| Depth | 329 mm |
|---|---|
| Width | 435 mm |
| Height | 150 mm |
| Weight | 8100 g |
To Next Page
