Need help?Do you have a question about the Onkyo TX-NR5100 and is the answer not in the manual?
General| Impedance | 16 Ω |
|---|---|
| Receiver type | Surround |
| Frequency range | 10 - 100000 Hz |
| Input sensitivity | 200 mV |
| Audio output channels | 7.2 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Dynamic power per channel (3 Ohm) | 160 W |
| Dynamic power per channel (4 Ohm) | 125 W |
| Dynamic power per channel (8 Ohm) | 85 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| Display | - |
| Bi-amping | Yes |
| HDCP version | 2.3 |
| Apple docking | No |
| Product color | Black |
| Audio decoders | DTS, DTS Virtual:X, Dolby Atmos, Dolby Surround, Dolby TrueHD |
| AM band range | 522 - 1629 kHz |
| FM band range | 87.5 - 107.9 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| HDMI in | 4 |
| USB ports quantity | 1 |
| Digital audio optical in | 2 |
| Banana connector | 7 |
| Connectivity technology | Wired |
| Bluetooth profiles | AAC, SBC |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| Power consumption (standby) | 0.1 W |
| Power consumption (typical) | 490 W |
| Cables included | AC |
Weight and Dimensions| Depth | 328 mm |
|---|---|
| Width | 435 mm |
| Height | 160 mm |
| Weight | 8400 g |
To Next Page
